Resumen
This study explored the regenerated performance of activated carbon (AC) as SO2 adsorbent. The optimal conditions of SO2 removal were determined by experiment, and then the adsorption efficiency of AC was studied by a method of thermal regeneration. The characteristics of regenerated AC were analyzed by Brunauer-Emmett-Teller (BET) and Scanning Electron Microscopy (SEM) methods. The test results showed that the most suitable adsorption conditions were using 4 g of activated carbon, 1.65 L/min gas flue rate, and 5% O2. During the ten regenerations, the desulfurization efficiency and sulfur capacity of AC still maintained a high level. The characterization results showed that the increase of material surface area and pore volume were 101 m2 g-1, and 0.13 cm3 g-1, respectively, after the cycles.