Resumen
The Kaiser effect of rock has been extensively studied due to its wide application in in-situ stress measurement and rock damage quantification. The uniaxial cyclic loading and unloading (UCLU) test is commonly employed to examine the rock Kaiser effect. However, how the two critical parameters, including prescribed stress in the first loading cycle (sA) and loading strain rate (lsr), affect the appearance of the Kaiser effect lacks thorough understanding. We systematically performed UCLU tests on 75 sandstone specimens under 25 combinations of sA and lsr. sA spans from 0.5sc (sc is the uniaxial compressive strength) to 0.9sc, and lsr ranges from 10-5 s-1 to 10-3 s-1, respectively. The acoustic emission characteristics of all the rock specimens are continuously monitored over the entire tests. We find that the Kaiser effect is unanimously observed in the stable crack growth stage, corresponding to the stress levels of 0.5sc to 0.7sc because under a lower stress, the Kaiser effect is easily covered by the acoustic emissions generated by microcrack friction. The loading strain rate also heavily affects the occurrence of the Kaiser effect. When lsr does not exceed 10-4 s-1, the Felicity ratio (FR) rises quickly as lsr ascends, whereas FR increases less pronouncedly once lsr exceeds 10-4 s-1. Therefore, a relatively high loading strain rate, i.e., lsr higher than 10-4 s-1, is suggested to facilitate the appearance of the Kaiser effect.