ARTÍCULO
TITULO

Modified Method for Determination of Wear Coefficient of Reciprocating Sliding Wear and Experimental Comparative Study

Tongmu Liu    
Jianxing Yu    
Huakun Wang    
Yang Yu    
Haoda Li and Baocheng Zhou    

Resumen

A modified method for predicting the wear coefficient of reciprocating sliding wear was proposed in this study, which is less time-consuming. Based on this method, reciprocating sliding wear tests of three chain alloys (CM490, SS316, and TC4) under different loadings were conducted and the friction coefficient, wear coefficient, and wear morphology were obtained and compared. The results indicated that the time-variant coefficient of friction (CoF) could be used as an indicator for the stable wear state; moreover, it also changes periodically with the wear direction. Statistical analysis of friction coefficient indicated that it follows bimodal distribution or multimodal distribution. The friction and wear behaviors of CM490 and SS316 were different from those of TC4, and a detailed micro-morphological analysis indicated that the discrepancy is caused by the difference in the quantity and size of the wear debris. Furthermore, an upper limit of the contact stress-dependent wear coefficient was also observed, and the variability of the wear coefficient was also analyzed.

 Artículos similares

       
 
Yevhenii Dobrynin,Viktor Volkov,Maksym Maksymov,Viktor Boltenkov     Pág. 6 - 15
Physical models of the formation of ballistic and muzzle waves generated during an artillery shot have been developed and investigated. A promising method for assessing the degree of wear of artillery barrels is the acoustic non-contact method. However, ... ver más

 
Viktor Aulin,Andrii Hrynkiv,Sergii Lysenko,Oleg Lyashuk,Taras Zamota,Dmytro Holub     Pág. 38 - 47
With the development of dispersed systems in tribology, there emerged a possibility to use effectively functional additives to lubricants in the form of geomodifiers. When introducing composite oils with geomodifiers, it is not necessary to perform const... ver más

 
Alfredo Morales, Oscar Piamba and Jhon Olaya    
We report the results of the influence of the acetylene and oxygen gas pressure on the wear resistance of aluminum?bronze coatings deposited on naval brass substrate by means of the thermal (flame) deposition process. The coatings were characterized by m... ver más
Revista: Coatings

 
Yandan Zhu, Mufu Yan, Quanli Zhang, Qiwen Wang and Hangyu Zhuo    
To improve the surface wear resistance, plasma nitriding of the prefabricated Cu-Ti films on the C17200 Cu alloy is performed to investigate the effects of the composition of the Cu-Ti films on the microstructure and the mechanical properties of the modi... ver más
Revista: Coatings

 
Sen Han, Mengmei Liu, Weigong Shang, Xiang Qi, Zhuang Zhang and Shihao Dong    
Aiming to solve the contradiction between the workability and performance of pothole patching using cold mixtures, this paper proposed new patching materials based on the microcapsule technique and polymer reinforcement, namely cold mixtures with polymer... ver más
Revista: Applied Sciences