Inicio  /  Agriculture  /  Vol: 13 Par: 4 (2023)  /  Artículo
ARTÍCULO
TITULO

Design and Test of an Automatic Navigation Fruit-Picking Platform

Shaojiong Huang    
Kaoxin Pan    
Sibo Wang    
Ying Zhu    
Qing Zhang    
Xin Su and Hongjun Yu    

Resumen

With the development in agricultural mechanization and information technology, orchard agricultural machinery is also constantly pursuing the goal of intelligence and efficiency. Fruit picking is the most labor-intensive part of the orchard harvesting process. In order to resolve the problems of high labor intensity, low picking efficiency, and labor shortage when harvesting dwarf high-density orchards, an automatic navigation fruit-picking platform with voice control was developed in the present study. First, the platform utilized a voice-controlled high-level extendable working platform and a fruit-box-lifting device to adapt to varying orchard planting row spacing and enable convenient fruit box loading and unloading. Second, an automatic navigation system, which employed China?s Beidou navigation satellite system to acquire positional data and the Stanley algorithm for path-tracking control, was implemented. Third, the fruit-picking platform with automatic navigation system was fabricated and assembled, its outer wheel steering was measured to have a maximum angle of 30.3° and an average minimum turning radius of 4.5 m, meeting the turning radius requirements under orchard conditions. Finally, automatic navigation tests of the developed platform were performed in the orchard conditions. The results indicated that the platform could maintain a straight-line path with a maximum lateral deviation of 101.5 mm and a maximum absolute average deviation of 44.1 mm at 0.4 m/s. Under the U-shaped paths, the measured maximum lateral deviation was 148.6 mm and the maximum absolute average deviation was 57.2 mm. The navigation accuracy was sufficient to meet the requirements for the harvesting platform?s routine operation in the orchards.

 Artículos similares

       
 
Jinbo Ren, Chongcheng Chen, Difa Bao, Wuxiong Weng and Shuhe Zheng    
Blade cutters are a component in paddy field pulping machines that perform mud splashing, and the design of their structural and motion parameters will directly affect the splashed-mud volume and pulping-machine efficiency. Therefore, the optimization of... ver más
Revista: Agriculture

 
Xuewen Fu, Ximei Wei, Meng Wang, Hongwen Zhang, Lei Wang, Jun Wang and Yuanzhao Zheng    
This study investigated the impact of compression molding parameters on the post-molding characteristics of machine-harvested seed cotton and aimed to determine the optimal compression molding parameters. The closed compression test of seed cotton and fo... ver más
Revista: Agriculture

 
Bin Li, Xiaolong Gao, Xuegeng Chen, Yang Liu, Shiguo Wang and Yuncheng Dong    
To solve the problems associated with the poor harvesting ability of existing sunflower harvester cutting tables, and high seed drop rates, we designed a sunflower cutting table that can greatly improve the operational performance of sunflower combine ha... ver más
Revista: Agriculture

 
Yichao Wang, Jiaxi Zhang, Shilong Shen, Jinming Li, Yanjun Huo and Zhenwei Wang    
In order to address the common difficulties in pulling and harvesting whole cotton stalks, such as high pulling resistance, high miss-pulling rate, and high breakage rate, which severely hinder the recycling of cotton stalks, three different pulling mech... ver más
Revista: Agriculture

 
Wendong Zhong, Xuan Zhao, Fei Liu, Hongbin Bai, Wenxue Dong, Hengtong Hu and Xiang Kong    
This paper proposes a solution to the problem of tight population in the filling area of traditional air suction seed metering devices during quinoa sowing, which leads to inaccurate adsorption. The proposed method disperses the population into a stable ... ver más
Revista: Agriculture