Inicio  /  Coatings  /  Vol: 13 Par: 6 (2023)  /  Artículo
ARTÍCULO
TITULO

Fabrication of Zn2+-Loaded Polydopamine Coatings on Magnesium Alloy Surfaces to Enhance Corrosion Resistance and Biocompatibility

Lingjie Meng    
Xuhui Liu    
Qingxiang Hong    
Yan Ji    
Lingtao Wang    
Qiuyang Zhang    
Jie Chen and Changjiang Pan    

Resumen

In this study, inspired by the adhesion protein of mussels, a Zn2+-loaded polydopamine (PDA/Zn2+) coating was prepared on an alkali?heat-treated magnesium alloy surface, through the chelating effect of PDA with metal ions, to improve anticorrosion and biocompatibility. The results of water contact angles show that the PDA/Zn2+ coatings with different Zn2+ contents had excellent wettability, which contributed to the selective promotion of the albumin adsorption. The corrosion degradation behaviors of the modified magnesium alloys were characterized using potentiodynamic scanning polarization curves, electrochemical impedance spectroscopy (EIS), and an immersion test, the results indicate that anticorrosion was significantly improved with the increase of Zn2+ content in the coating. Meanwhile, the PDA/Zn2+ coatings with different Zn2+ concentrations demonstrated improved hemocompatibility, confirmed by assays of the hemolysis rate and platelet adhesion behaviors. In addition, the results regarding the growth behaviors of endothelial cells (ECs) suggest that, due to the sustained release of Zn2+ from the coatings, the modified magnesium alloys could enhance the adhesion, proliferation, and upregulated expression of vascular endothelial growth factor (VEGF) and nitric oxide (NO) in endothelial cells, and that better cytocompatibility to ECs could be achieved as the Zn2+ concentration increased. Therefore, the PDA/Zn2+ coatings developed in this study could be utilized to modify magnesium alloy surfaces, to simultaneously impart better anticorrosion, hemocompatibility, and endothelialization.

 Artículos similares

       
 
Gillo Giuliano and Wilma Polini    
This work proposes a simple procedure to characterize 1.0 mm thick sheets of superplastic magnesium alloy AZ31. The simplest mathematical function that models the behavior of a superplastic material is a power law between stress and strain rate with two ... ver más
Revista: Applied Sciences

 
Shin Ying Ang, Hui Weng Goh, Bashirah Mohd Fazli, Hazzeman Haris, Nor Ariza Azizan, Nor Azazi Zakaria and Zubaidi Johar    
Constructed wetlands are an affordable and reliable green alternative to conventional mechanical systems for treating domestic sewage. This study investigates the potential of 14 tropical wetland plant species for removing heavy metals from domestic sewa... ver más
Revista: Water

 
Shuai Zhang, Mengcheng Gong, Ling Cen, Yang Lu and Ming Gao    
Hybrid wire arc additive-milling subtractive manufacturing (HWMM) is an effective way to improve the quality of complex metal components, but the difference in the properties of the aluminum alloy and magnesium alloy fabricated by HWMM has been not addre... ver más
Revista: Applied Sciences

 
Emna Hfaiedh, Amor Ben Moussa, Marco Petitta and Ammar Mlayah    
Hydrogeochemical properties and groundwater quality assessment are very important for the effective management of water resources in arid and semiarid regions. The present investigation is a spatiotemporal analysis of groundwater quality using both chemi... ver más
Revista: Applied Sciences

 
Aigul Koizhanova, Bagdaulet Kenzhaliyev, David Magomedov, Emil Kamalov, Mariya Yerdenova, Akbota Bakrayeva and Nurgali Abdyldayev    
This paper provides an overview of hydrometallurgical copper extraction studies in which liquid extraction technology has been used with four copper deposits of different compositions. The sulfuric acid consumption rate and copper extraction efficiency, ... ver más
Revista: ChemEngineering