Inicio  /  Applied Sciences  /  Vol: 11 Par: 12 (2021)  /  Artículo
ARTÍCULO
TITULO

Fatigue Design of Steel Bridge Deck Asphalt Pavement Based on Nonlinear Damage Accumulation Theory

Xunqian Xu    
Yu Li    
Wei Huang    
Dakai Chen    
Chen Zhang and Wenkang Shi    

Resumen

Based on the nonlinear damage theory, this paper aims to explore the fatigue performance of steel bridge deck asphalt pavement under multistage fatigue load. Manson?Halford cumulative damage model and the modified model were introduced to describe loading sequence effects, and interactions between multiple loads were represented in stress ratio. The fatigue life prediction method of steel bridge deck asphalt pavement was put forward, considering loading sequence effects and load interactions. The fatigue design of steel bridge deck asphalt pavement was investigated with the fatigue life prediction model. The effects of different load levels and loading sequence on the fatigue design parameters stress ratio of steel bridge deck asphalt pavement were studied. The design results were compared with experimental results, and the prediction results were based on traditional Miner?s theory. The analysis results showed that the fatigue life prediction method based on the nonlinear cumulative damage theory can effectively design and analyze the fatigue characteristics of asphalt pavement of steel bridge deck with high accuracy and reliability. The fatigue life prediction model of steel bridge deck asphalt pavement can well reflect loading sequence effects and load interactions. In addition, the design model has relatively few parameters; therefore, it can be applied to practical engineering design.

 Artículos similares

       
 
Feng Hu and Hongbing Xin    
The flexible bearing is the kernel component of the cam wave generator. In precision transmission applications such as miniature robot joints, flexible bearings are required to have a smaller mass, lower moment of inertia, and larger inner diameter. Base... ver más
Revista: Applied Sciences

 
Meng Wang, Hongen Li, Hu Chen, Xingbo Fang, Enze Zhu, Pujiang Huang, Xiaohui Wei and Hong Nie    
The torsion spring of a carrier-based aircraft landing gear is a key component, which is normally manufactured out of AerMet100 ultra-high-strength steel. The takeoff and landing performance is greatly influenced by its bearing capacity and structural du... ver más
Revista: Aerospace

 
Zeng Wang, Xiancheng Wang and Ruidong Li    
In previous research on treadmills, the main focus has been on comparing the physiological differences induced by running on treadmill decks and other exercise surfaces, with relatively little research on the mechanical properties of treadmill decks. Red... ver más
Revista: Applied Sciences

 
Arkadiusz Bednarz, Krzysztof Bieniek, Radoslaw Kolodziejczyk, Zygmunt Szczerba, Piotr Krauz, Monika Lubas and Kamil Szczerba    
This article presents an experimental approach to fatigue testing of cableway gondolas, carried out in accordance with the EN 13796-3 standard. Due to the limitations of the aforementioned regulations and the lack of clarity in their content, when design... ver más

 
Dennis Beier, Anja Schnepf, Sean Van Steel, Naiquan Ye and Muk Chen Ong    
The use of floating offshore wind farms for electrical energy supply is expected to rise significantly over the coming years. Suspended inter-array power cables are a new design to connect floating offshore wind turbines (FOWTs) with shorter cable length... ver más