Inicio  /  Water  /  Vol: 11 Par: 3 (2019)  /  Artículo
ARTÍCULO
TITULO

Harmless Treatment of Phenylhydrazine Hydrochloride Production Effluent: From Lab Scale to Pilot Scale

Di Zhou    
Xide Liu and Chuangqi Chen    

Resumen

More economical and effective technology is being developedin the wastewater treatment process to deal with the products of phenylhydrazine hydrochloride (PHH). Fixed ammonium in the effluent is converted to free ammonia by utilizing the neutralization reaction, and the sulfate is removed in the form of gypsum. Meanwhile, the toxic PHH is recycled according to the extraction and re-extraction technology. The raffinate phase is reused through boiling off ammonia vapor. The recovery rates of PHH reach 93.3% in the laboratory and 92.9% at the pilot scale, respectively. Compared with our previous work, the cost of the new technology is ~1/10 of the original, and the profit increases ~3.5-fold. Consequently, it has great potential to be applied to industrial production.

 Artículos similares

       
 
Jieying Liu and Zhigao Bi    
Anaerobic digestion is a promising technology for treating and disposing of oily sludge, but the presence of oil in the sludge reduces methane production and sludge volume reduction. To overcome this limitation, this study creatively reports the use of m... ver más
Revista: Water

 
Sara Justino, Cristina S. C. Calheiros, Paula M. L. Castro and David Gonçalves    
The hospitality industry is increasing its awareness of how the integration of nature-based solutions can decrease its environmental impact while maintaining or increasing the service level of the sector. Constructed wetlands (CWs) constitute a promising... ver más
Revista: Hydrology

 
Xiaosong Zha, Shuren Wang and Deyu Zhang    
N-nitrosodimethylamine (NDMA), as an emerging nitrogenous disinfection byproduct, is strictly controlled by multiple countries due to its high toxicity in drinking water. Advanced reduction processes (ARPs) are a new type of water treatment technology th... ver más
Revista: Water

 
Naotaka Itano, So Yoon Lee and Ai Serizawa    
Al alloys possess excellent physical and mechanical properties, such as low density, high specific strength, and good ductility. However, their low corrosion resistance limits their use in corrosive environments. The steam coating process has attracted c... ver más
Revista: Coatings

 
Huihui Xuan, Qing Liu, Lei Wang and Liu Yang    
In the context of the decarbonization of the shipping industry, the application of clean energy technologies is a catalyst for decarbonization. With the number of potential clean energy technologies expanding, the uncertainties in terms of technology mat... ver más