Resumen
Slow-releasing tablets combined with persulfate acting as an oxidant and ferrous iron acting as an activator were manufactured for in situ chemical oxidation. The trichloroethylene (TCE) removal efficiency according to the molar ratio of the oxidizer and activator in the 0, 0.5, 1, 1.5, 2, and 2.5 molar ratio (persulfate: ferrous iron) reactors were 15%, 89%, 90%, 82%, 71%, and 55%, respectively. In a batch reactor injected with an oxidation-activation combined tablet (OACT) and a liquid oxidizing/activator, the TCE removal efficiencies were 100% and 70%, respectively, showing that the tablet form had a high efficiency in contaminant removal. The evaluation of the dissolution characteristics and TCE removal efficiency of OACT 0.5 (tablet with a 1:0.5 molar ratio of persulfate to activator) and OACT 1.0 (tablet with a 1:1 molar ratio of persulfate to activator) under continuous flow conditions showed that the TCE removal efficiency of the OACT 1.0 column was approximately 1.4 times higher than that of OACT 0.5. The longevities of persulfate and ferrous iron of the OACT 1.0 tablet were 43.2 days and 41.7 days, respectively. Thus, OACT 1.0, which was manufactured effectively, was suitable for in situ slow-release chemical oxidation systems.