Resumen
A wide variety of geographic information system tools and methods was used for pre-dam topography reconstruction and reservoir bottom surveying in two dam reservoirs in the Ohre River, Czech Republic. The pre-dam topography was reconstructed based on archival aerial imagery and old maps. The benefits and drawbacks of these methods were tested and explained with emphasis on the fact that not all processed archival data are suitable for pre-dam topography modeling. Bathymetric surveying of a reservoir bottom is presently routine, but in this study, we used a wide combination of bathymetric mapping methods (sonar, ground penetration radar, and sub-bottom profiler) and topographic survey tools (LiDAR and photogrammetry), bringing great benefits for bottom dynamic analysis and data cross-validation. The data that we gathered made it possible to evaluate the formation of the inflow deltas in the reservoirs studied and assess the sediment reworking during recent seasonal drawdowns. A typical inflow delta was formed in the deeper of the two studied reservoirs, while the summer 2019 drawdown caused the formation and incision of a temporary drawdown channel and erosive downstream transport of approximately 1/10 of the delta body thickness in approximately 1/10 of the delta transverse size. No inflow delta was formed in the shallower of the studied reservoirs, but unexpectedly extensive sediment reworking was observed in the inflow part of the reservoir. Both the studied reservoirs and the pre-dam river floodplain have accumulated historical contamination by risk elements such as As, Hg, Pb; thus, the enhanced erosion of existing sediment bodies expected in the future, owing to more frequent droughts and global climate change, will endanger the ecological quality of the water and solids outflowing from the reservoirs.