Inicio  /  Applied Sciences  /  Vol: 12 Par: 3 (2022)  /  Artículo
ARTÍCULO
TITULO

Pressure Drop and Particle Settlement of Gas?Solid Two-Phase Flow in a Pipe

Wenqian Lin    
Liang Li and Yelong Wang    

Resumen

Particle settlement and pressure drop in a gas?solid two-phase flow in a pipe with a circular cross-section are studied at mixture inlet velocities (V) ranging from 1 m/s to 30 m/s, particle volume concentrations (as) ranging from 1% to 20%, particle mass flows (ms) ranging from 5 t/h to 25 t/h, and particle diameters (dp) ranging from 50 µm to 1000 µm. The momentum equations are based on a two-fluid model and are solved numerically. Some results are validated through comparison with the experimental results. The results showed that the gas and particle velocity distributions are asymmetrical around the center of the pipe and that the maximum velocity point moves up. The distance between the radial position of the maximum velocity and the center line for the gas is larger than that for the particles. The particle motion lags behind that of the gas flow. The particle settlement phenomenon is more serious, and the particle distribution on the cross-section is more inhomogeneous as the V, as, and ms decrease and as dp increases. It can be divided into three areas according to the pressure changes along the flow direction, and the distinction between the three areas is more obvious as the as increases. The pressure drop per unit length increases as the V, as and ms increases and as dp decreases, Finally, the expressions of the settlement index and pressure drop per unit length as functions of V, as, ms, and dp are derived based on the numerical data.

 Artículos similares

       
 
Wenjie Shen, Suofang Wang and Xiaodi Liang    
Impellers are utilized to increase pressure to ensure that a radial pre-swirl system can provide sufficient cooling airflow to the turbine blades. In the open literature, the pressurization mechanism of the impellers was investigated. However, the effect... ver más
Revista: Aerospace

 
Zhengwei Wang, Haitao Gu, Jichao Lang and Lin Xing    
This study verifies the effects of deployment parameters on the safe separation of Autonomous Underwater Vehicles (AUVs) and mission payloads. The initial separation phase is meticulously modeled based on computational fluid dynamics (CFD) simulations em... ver más

 
Alireza Kakoee, Jacek Hunicz and Maciej Mikulski    
This paper presents a comprehensive investigation into the design of a methane oxidation catalyst aftertreatment system specifically tailored for the Wärtsilä W31DF natural gas engine which has been converted to a reactivity-controlled compression igniti... ver más

 
Pau Bas-Calopa, Jordi-Roger Riba and Manuel Moreno-Eguilaz    
The combination of the low-pressure environment found in aircraft systems and the gradual electrification of aircraft increases the risk of electrical discharges occurrence. This is an undesirable situation that compromises aircraft safety and complicate... ver más
Revista: Aerospace

 
Amel Hind Hassein-Bey, Abd-Elmouneïm Belhadj, Hichem Tahraoui, Selma Toumi, Asma Nour El Houda Sid, Mohammed Kebir, Derradji Chebli, Abdeltif Amrane, Jie Zhang and Lotfi Mouni    
The ?excess salt replication process? is a new simple method of fabrication of open-cell metal foam based on the commonly known salt replication method. Porous materials with porosity between 46% and 66% result when the employed alloy is 25% antimonial l... ver más
Revista: Water