Inicio  /  Nauka ta Progres Transportu  /  Núm: 40 Par: 0 (2012)  /  Artículo
ARTÍCULO
TITULO

Research of strained-and-stressed state of supporting structure of track machine KRS-1

B. M. Tovt    
E. M. Dzichkovskyy    
O. E. Kryvchykov    

Resumen

In this article the results of analytical and experimental research of the strained-and-stressed state of supporting structure of the track machine KRS-1 are presented. The analytical research is executed with the use of finiteelement method (FEM). The results of analytical research are used during realization of running dynamic durability tests. The results of experimental and analytical research are compared. On the basis of analysis of the obtained calculation and experimental data the estimation of durability of supporting structure of the track machine KRS-1 is performed.

 Artículos similares

       
 
Elide Nastri and Paolo Todisco    
Sometimes it is difficult to choose the most appropriate failure criterion for the problem analyzed. For brittle materials, attention must be paid to the availability of experimental data and the calibration of the representative parameters, within the c... ver más
Revista: Buildings

 
Haksung Lee, Seok-Jae Kim, Bang-Hun Kang and Kwang-Seung Lee    
The greenhouse foundation method requires a lower allowable bearing capacity compared to general buildings, but the high-spec and expensive prestressed high-strength concrete (PHC) pile reinforcement method is mainly applied. Therefore, the deep cement m... ver más
Revista: Buildings

 
In order to test the reliability of neural networks for the prediction of the behaviour of multi-storey multi-bay infilled frames, neural network processing was done on an experimental database of one-storey one-bay reinforced-concrete (RC) frames with m... ver más
Revista: Buildings

 
F. Nuñez-Moreno, L. Jaramillo, P. Rodriguez, M. Quintero, J. Rubio     Pág. 131 - 148
The present research summarizes the test results of mechanical capacity of built-up structural elements, intending to introduce the possibility of using RTPBB as material for creating structural solutions for temporary housing, and for small houses. Holl... ver más

 
Hildemar Hernández, Jorge Bonilla, Gilberto Rodríguez     Pág. Page 5 - 21
The present research develops a preliminary study on the behavior of composite beams made of concrete and steel, which are assembled by bolt-type connectors. The numerical simulation process employed software named ABAQUS, which is based on a Finite Elem... ver más