Inicio  /  Aerospace  /  Vol: 10 Par: 8 (2023)  /  Artículo
ARTÍCULO
TITULO

Low-Boom Design for Supersonic Transport with Canard and Forward-Swept Wings Using Equivalent Area Design Method

Yuki Kishi    
Risato Yashiro and Masahiro Kanazaki    

Resumen

Forward-swept wings can be expected to be lower-boom planforms with similar amount of drag as backward-swept wings because of their good lift distributions. In this study, the equivalent area distribution of a ten-seater supersonic forward-swept wing aircraft with a canard was designed to obtain design knowledge for leading boom reduction. The equivalent area distribution of the aircraft was calculated by solving the compressible Euler equation. A feasible target equivalent area distribution was generated based on Darden?s method and compared with the equivalent area distribution. To achieve a closer match in terms of lift and geometry with the target, the main wing planform and the position of the main wing along the body and vertical axes were modified. The low-boom performances were evaluated using the extended Burgers equation. The design results indicated that the forward-swept wing configuration with a canard could divide the single peak of the leading boom into two peaks. Thus, the sonic boom strength of the canard configuration was 2.5 PLdB lower than that of the configuration without the canard wing.

 Artículos similares

       
 
Manoharan Bhuvanesh, Girolamo Costanza and Maria Elisa Tata    
Closed-cell aluminium foams with different compositions have been manufactured starting from powders and also characterized from a morphological point of view and by means of compressive tests in order to determine mechanical properties. Circularity, equ... ver más
Revista: Applied Sciences

 
Lijin Liu, Youcai Tuo, Hao Xia, Yun Deng, Xu Zhang and Haoyu Wang    
The discharge of low-temperature water from the middle and lower layers of thermally stratified dam reservoirs leads to thermal pollution and adversely affects fish production and reproduction in downstream rivers. Selective water withdrawal using stoplo... ver más
Revista: Water

 
Qingfu Li, Hao Guo and Biao Guo    
When a steel box girder is constructed using the jacking method, the contact area between the jack and the bottom of the girder is subjected to complex forces, and it is very critical to ensure the local stability of the girder. When the phenomenon of un... ver más
Revista: Applied Sciences

 
Yang Huang, Junling Deng, Min Xiao, Yujie Huang, Hui Li, Yinyin Xiao and Yiting Huang    
The ecosystem service value (ESV) gradient-evolution pattern of a river basin?s land and water-intertwined zones has a variety of ecosystem service values, such as biodiversity conservation, water conservation, water purification, etc. The study of the e... ver más
Revista: Applied Sciences

 
Francisco Pérez-Arribas    
CAD software is a daily tool in ship design offices and shipyards, and every software uses NURBS or B-splines curves and surfaces as common foundations. The CAD tools of today are not static software products and most of them now include parametric desig... ver más