Inicio  /  Aerospace  /  Vol: 10 Par: 6 (2023)  /  Artículo
ARTÍCULO
TITULO

Aerodynamic Analysis of an Orthogonal Octorotor UAV Considering Horizontal Wind Disturbance

Yao Lei    
Yazhou Li and Jie Wang    

Resumen

In this paper, the aerodynamic performance of an orthogonal octorotor UAV considering horizontal wind disturbances is investigated with numerical simulations and experiments. To obtian the effect of horizontal wind on the flight efficiency of the orthogonal octorotor UAV, the power consumption and thrust with different wind speeds (0?4 m/s) and rotational speeds (1500?2300 RPM) are measured in a low-speed wind tunnel. Also, the velocity distribution of downwash flow, blade tip vortex distribution, streamline distribution and rotor blade tip pressure distribution of the orthogonal octorotor UAV were simulated by the computational fluid dynamics (CFD). The test results show that the thrust is increased at lower wind speed compared with 0 m/s. Specifically, it increased by 8.1% at 2 m/s and 8.8% at 4 m/s, respectively. It is interesting to note that the increased power consumption caused by the interference of horizontal wind at a higher rotor speed leads to a decrease in power loading (PL). Additionally, the thrust increased with a higher PL at low speed, where the PL achieved the maximum for the wind of 2.5 m/s and obtained a better aerodynamic performance. Compared with traditional octorotor UAVs and eight equivalent isolated rotors, the orthogonal octorotor UAV has also been proven to obtain good wind resistance. Simulation results show that the increase in wind speed and rotor speed will make the flow field more complex and the airflow interference between rotors more intense, which leads to changes in rotor thrust and power consumption.

 Artículos similares

       
 
Yiming Gong, Chuanqiang Gao and Weiwei Zhang    
The main buffet suppression techniques of aircrafts include active and passive flow control, aiming to reduce the impact of the fluctuating loads on the airfoil. These techniques are remedies after the airfoil design. The buffet suppression is not always... ver más
Revista: Aerospace

 
Neboj?a Lukic, Toni Ivanov, Jelena Svorcan and Aleksandar Simonovic    
A novel concept of morphing airfoils, capable of changing camber and thickness, is proposed. A variable airfoil shape, defined by six input parameters, is achieved by allowing the three spinal points (at fixed axial positions) to slide vertically, while ... ver más
Revista: Aerospace

 
Siliang Du, Yi Zha and Qijun Zhao    
The concept of the Fan Wing, a novel aircraft vector-force-integrated device that combines a power unit with a fixed wing to generate distributed lift and thrust by creating a low-pressure vortex on the wing?s surface, was studied. To investigate the uni... ver más
Revista: Aerospace

 
Boqian Ji, Jun Huang, Xiaoqiang Lu, Yacong Wu and Jingjiang Liu    
The wing aerodynamic shape optimization is a typical high-dimensional problem with numerous independent design variables. Researching methods to reduce the dimensionality of optimization from the perspective of aerodynamic characteristics is necessary. O... ver más
Revista: Aerospace

 
María Elena Tejeda-del-Cueto, Manuel Alberto Flores-Alfaro, Miguel Toledo-Velázquez, Lorena del Carmen Santos-Cortes, José Hernández-Hernández and Marco Osvaldo Vigueras-Zúñiga    
The objective of this study is to develop a genetic algorithm that uses the IGP parameterization to increase the lift coefficient (CL) of three airfoils to be used on wings of unmanned aerial vehicles (UAVs). The geometry of three baseline airfoils was m... ver más
Revista: Aerospace