Resumen
The residual oil after primary or secondary oil recovery can be recovered by the methods of EOR (Enhanced Oil Recovery). The objective of this study is screening the surfactants that generate maximum stable foam in the presence of brine salinity at 92oC. Laboratory experiments have been performed to examine and compare the stability of generated foam by individual and blended surfactants in the synthetic brine water. AOS C14-16 (Alpha Olefin Sulfonate) and SDS (Sodium Dodecyl Sulfonate) were selected as main surfactants. Aqueous stability test of AOS C14-16 and SDS with brine water salinity 62070ppm was performed at 92oC. AAS (Alcohol Alkoxy Sulfate) was blended with SDS and AOS C14-16. The solution was stable in the presence of brine salinity at same conditions. Salt tolerance experimental study revealed that AOS C14-16 did not produce precipitates at 92oC. Further, the foam stability of surfactant blend was performed. Result shows that, the maximum life time of generated foam was observed by using blend of 0.2wt% SDS+0.2wt% AOS+0.2wt% AS-1246 and 0.2wt% AOS+0.2wt% IOSC15-18+0.2wt% AAS surfactants as compared to the foam generated by individual surfactants. The success of generated foam by these surfactant solutions in the presence of brine water is the primary screening of surfactant stability and foamability for EOR applications in reservoirs type of reservoirs.