Inicio  /  Aerospace  /  Vol: 10 Par: 8 (2023)  /  Artículo
ARTÍCULO
TITULO

The Influence of Narrowband Interference on DME System Operation

Milan D?unda and Lucia Melníková    

Resumen

Within the new air traffic management concept, using the Global Navigation Satellite System (GNSS), it is assumed that distance measurement equipment (DME) will be retained. The results of research carried out by several authors have confirmed that global navigation satellite systems (GNSS) can be put out of operation in cases of interference. Therefore, it is very timely to investigate the accuracy and resistance to interference of DME systems. The presented work contains the results of research in the field of assessment of the accuracy and resistance of a DME system, which works in conditions of narrowband interference, using modeling and simulation. Based on the derived model of the DME measurement signal, its parameters, and narrowband interference, algorithms for processing the measurement signals of a DME system in conditions of narrowband interference were derived. A quasi-optimal nonlinear filtering method was used in the derivation of the measurement signal-processing algorithms. A quadratic loss function was used as an optimality criterion, which allows us to obtain the results of measuring the parameters of the DME measurement signal as a minimum of the a posteriori mean error. Within this method, Gaussian approximation and large and small parameter methods were used. Simulation of the operation of the DME system confirmed that the measurement accuracy of this system depends on the stability of the frequency of the DME support generator, and also depends on the signal-to-noise ratio and the signal-to-interference ratio of the DME receiver input. Comparing the results of the DME system receiver designed by us with the parameters listed in in published works that discuss the accuracy of this system, we can conclude that its accuracy is much better. The simulation results confirmed that the potential accuracy of the distance measurement is equal to 2.2 m. However, the mentioned algorithms require substantial simplification to be used for real-time signal processing. This will be our next research direction.

 Artículos similares