Inicio  /  ChemEngineering  /  Vol: 3 Núm: 1 Par: March (2019)  /  Artículo
ARTÍCULO
TITULO

Electrochemical Carbon Dioxide Reduction in Methanol at Cu and Cu2O-Deposited Carbon Black Electrodes

Naoki Uemoto    
Mai Furukawa    
Ikki Tateishi    
Hideyuki Katsumata and Satoshi Kaneco    

Resumen

-

 Artículos similares

       
 
Fouad Benhiba, Mohcine Missioui, Selma Lamghafri, Rachid Hsissou, Abdelkbir Bellaouchou, Hassan Oudda, Abdellatif Lamhamdi, Ismail Warad, Youssef Ramli and Abdelkader Zarrouk    
The anti-corrosion features of 1-dodecyl-3-phenylquinoxalin-2(1H)-one (QO12) for carbon steel CS were evaluated in a 1 M HCl solution using potentiodynamic polarization (PDP), electrochemical impedance (EIS) and UV-visible spectroscopy, and scanning elec... ver más
Revista: Coatings

 
Yixun Yu, Mengmeng Liang and Yunfeng Pan    
Epoxy coatings provide an economical and practical solution for combating steel corrosion. However, epoxy coatings have poor conductivity, resulting in the accumulation of electrostatic charges. The surface conductivity and anticorrosion properties of ep... ver más
Revista: Coatings

 
Sumira Malik, Shristi Kishore, Archna Dhasmana, Preeti Kumari, Tamoghni Mitra, Vishal Chaudhary, Ritu Kumari, Jutishna Bora, Anuj Ranjan, Tatiana Minkina and Vishnu D. Rajput    
The treatment of wastewater is an expensive and energy-extensive practice that not only ensures the power generation requirements to sustain the current energy demands of an increasing human population but also aids in the subsequent removal of enormous ... ver más
Revista: Water

 
Yiqun Liu, Hailong Lu and Yue Cui    
The exploration of the ocean is essential for the exploitation of marine resources and the sustainable development of human society. In order to assess both the health and the resources of the marine environment, a variety of chemical and biological samp... ver más

 
Feifei Huang, Erju Liu, Yi Qin, Qingrui Wang, Ying Jin, Lei Wen and Hai Chang    
By applying 2205 duplex stainless steel powders to repair and improve carbon steel, multi-pass laser-cladding tests were conducted on Q235 carbon steel surfaces with different laser powers in the range of 1.9~2.5 kW in order to evaluate the performance o... ver más
Revista: Coatings