Resumen
This paper reports the effect of boiling synthetic seawater on the performance of damaged Thermally Sprayed Aluminum (TSA) on carbon steel. Small defects (4% of the sample?s geometric surface area) were drilled, exposing the steel, and the performance of the coating was analyzed for corrosion potential for different exposure times (2 h, 335 h, and 5000 h). The samples were monitored using linear polarization resistance (LPR) in order to obtain their corrosion rate. Scanning electron microscopy (SEM)/energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD) were used for post-test characterization. The results showed that a protective layer of Mg(OH)2 formed in the damaged area, which protected the underlying steel. Additionally, no coating detachment from the steel near the defect region was observed. The corrosion rate was found to be 0.010?0.015 mm/year after 5000 h in boiling synthetic seawater.