ARTÍCULO
TITULO

Strength and microstructure of micro ceramic dust admixed lime stabilized soil

Jijo James    
Pitchai Kasinatha Pandian    

Resumen

The use of micro ceramic dust (CD) as an additive to lime in soil stabilization has been analysed in this study. CD was obtained by crushing and sieving of waste ceramic tiles from construction debris. The initial consumption of lime (ICL) for soil modification was determined using Eades and Grim pH test. In order to study the effect of lime content on soil stabilization, three different lime contents (below ICL, ICL and above ICL) were used for stabilizing the soil. These three lime contents were amended with various amounts of CD to study its effect on the strength of the stabilized soil. Unconfined compression strength (UCS) tests were carried out on the stabilized soil specimens of dimensions 38mm x 76mm at different ages of curing. The spent UCS samples were crushed and sieved to carry out Atterberg limits and free swell tests followed by x-ray diffraction (XRD) and scanning electron microscopy (SEM) tests for determining changes in microstructure. The results indicated that the addition of CD resulted in a marginally negative influence on the early strength of the stabilized soil at three days of curing whereas it enhanced the delayed strength of the soil at 28 days of curing, gaining between 12-14% strength. The effect of CD on the plasticity and swell-shrink of lime stabilized soil indicated a further reduction in plasticity and swell-shrink nature. The mineralogy of the amended soil revealed the formation of CSH and CAH minerals responsible for strength gain. SEM images used to analyse the microstructure of the virgin and stabilized soil, indicated the formation of a dense and compact microstructure. Finally, it was concluded that CD can be adopted as an auxiliary additive to lime in stabilization of expansive soil with provision of sufficient curing and the delayed onset of early strength due to CD can be overcome by using higher lime content in stabilization.

 Artículos similares

       
 
Kai Yao, Qing Li, Ping Chen, Juntong Li, Penghuai Wang and Wenqi Tang    
In response to the high water sorptivity of alkali-activated slag?red mud?steel slag cementitious material (AASRSS), water and aggressive ions are easily transferred to the interior of cementitious materials, which poses a significant threat to their dur... ver más
Revista: Applied Sciences

 
Junjie Cai, Shengpeng Hu, Hongbing Liu, Danyang Lin, Wei Fu and Xiaoguo Song    
Dissimilar materials brazing of Ti2AlNb alloy to GH99 superalloy is of great pragmatic importance in the aerospace field, especially the lightweight space aircraft components manufacturing. In this work, TiZrCuNi amorphous filler alloy was used as brazin... ver más
Revista: Aerospace

 
Noor irinah Omar, Yusliza Yusuf, Syahrul Azwan bin Sundi, Ilyani Akmar Abu Bakar, Verry Andre Fabiani, Toibah Abdul Rahim and Motohiro Yamada    
The cold spray or Supersonic Particle Deposition technique has great potential for producing ceramic nanostructured coatings. This technique operates at a processing temperature that is low enough to preserve the initial feedstock materials? microstructu... ver más
Revista: Coatings

 
Teng Zhao, Hongxiu Du and Linhao Wang    
Experiments such as microbial activation culture, subculture selection, and fire damage repair of cement mortar specimens were conducted to investigate the repairing effect of Sporosarcina pasteurii as a repair agent for fire-damaged cracks in cement mor... ver más
Revista: Applied Sciences

 
Daniel Mulat Nega, Begashaw Worku Yifru, Woubishet Zewdu Taffese, Yalew Kassa Ayele and Mitiku Damtie Yehualaw    
The purpose of this study is to examine the effects of partially replacing cement with a blend of marble waste powder (MWP) and granite waste powder (GWP) in mortar, with the goal of reducing the environmental harm caused by cement. The investigation inc... ver más
Revista: Applied Sciences