ARTÍCULO
TITULO

Application of Sliding Mode Control in Indirect Field Oriented Control (IFOC) for Model Based Controller

Angga Wahyu Aaditya    
Dedid Cahya Happyanto    
Bambang Sumantri    

Resumen

Indirect Field Oriented Control (IFOC) is one of the vector control methods that can be applied to induction motor in the industrial world rather than Direct Field Oriented Control (DFOC) because of the flux is obtained from the formulation. However, IFOC can not guarantee the robustness and stability of the systems. Stability analysis such as Lyapunov Stability Theory can be used to make the system stable but not the robustness. Model based controller that can guarantee the stability and robustness such as sliding mode control (SMC) and fuzzy needs to be added in IFOC system to achieve proportional response system. Robust current regulator using sliding mode control was designed in this paper from state space model for model based controller. In transient response and under disturbance SMC shows better performance than PID in rising time and robustness at rotor speed and stator current.

 Artículos similares

       
 
María Zamarreño Suárez, Juan Marín Martínez, Francisco Pérez Moreno, Raquel Delgado-Aguilera Jurado, Patricia María López de Frutos and Rosa María Arnaldo Valdés    
The use of electroencephalography (EEG) techniques has many advantages in the study of human performance in air traffic control (ATC). At present, these are non-intrusive techniques that allow large volumes of data to be recorded on a continuous basis us... ver más
Revista: Aerospace

 
Chenglou Liu, Fangfang Xie and Tingwei Ji    
Formation path planning is a significant cornerstone for unmanned aerial vehicle (UAV) swarm intelligence. Previous methods were not suitable for large-scale UAV formation, which suffered from poor formation maintenance and low planning efficiency. To th... ver más
Revista: Aerospace

 
Tingbo Zhou, Zhengke Zhang, Yongqiang Tian, Zhongxiang Xi, Xiaomu Dou, Weidong Liu, Guobiao Zhang and Chao Gao    
Aimed at addressing the difficult problems existing in extremely low speed calibration facilities for hot-wire anemometers, where calibration accuracy is often insufficient and vulnerable to the contamination from temperature and humidity discrepancies b... ver más
Revista: Applied Sciences

 
Wenhao Li, Xianxia Zhang, Yueying Wang and Songbo Xie    
Model predictive control (MPC), an extensively developed rolling optimization control method, is widely utilized in the industrial field. While some researchers have incorporated predictive control into underactuated unmanned surface vehicles (USVs), mos... ver más

 
Péter Bauer and Mihály Nagy    
Research and industrial application can require custom high-level controllers for industrial drones. Thus, this paper presents the high-fidelity dynamic and control model identification of the DJI M600 Pro hexacopter. This is a widely used multicopter in... ver más
Revista: Aerospace