ARTÍCULO
TITULO

Response Characteristics of the DeepCwind Floating Wind Turbine Moored by a Single-Point Mooring System

Yingyi Liu    
Shigeo Yoshida    
Hiroshi Yamamoto    
Akinori Toyofuku    
Guanghua He and Shunhan Yang    

Resumen

In recent years, the SPM (Single-Point Mooring) concept has been widely employed in several branches of the naval architecture and marine engineering field, such as FPSOs (Floating Production, Storage and Offloading units), offshore oil rigs, etc., but not yet popular in the offshore wind energy. To investigate the response characteristics of an SPM-moored FWT (Floating Wind Turbine), in the present work, we perform a numerical study on the DeepCwind semisubmersible wind turbine, using the state-of-the-art open-source tool FAST. The free-decay test results show that the SPM layout affects the natural periods of the wind turbine in rotational modes, as well as the mooring stiffness of the diagonal rotational and crossing rotational-translational terms, especially in relation to the yaw mode. Comparisons of the RAOs (Response Amplitude Operators) elucidate that the presence of wind influences significantly the sway, roll and yaw motions of the SPM layout. Finally, the weathervane test shows that an asymmetry exists in the free-yaw motion response when the semisubmersible wind turbine is moored by an SPM system.

 Artículos similares

       
 
Yadong Zhu, Haifeng Jiao, Shihui Wang, Wenbo Zhu, Mengcheng Wang and Songshan Chen    
In order to study the pressure pulsation characteristics and structural dynamic response characteristics of a vertical shaft cross-flow pump, this study used a computational fluid dynamics (CFD) numerical simulation method to analyze the pressure pulsati... ver más
Revista: Water

 
Qi Hong, Tianyi Zhou and Junde Qi    
Polishing force is one of the key process parameters in the polishing process of blisk blades, and its control accuracy will affect the surface quality and processing accuracy of the workpiece. The contact mechanism between the polishing surface and flap... ver más
Revista: Applied Sciences

 
Chang Yan, Wen-Jie Fan, Da-Miao Wang and Wen-Zhang Zhang    
Mechanical interfaces are prevalent in industries like aerospace and maritime, where the normal contact stiffness on these surfaces is a crucial component of the overall stiffness of mechanical structures. From the perspective of structural mechanics, no... ver más
Revista: Applied Sciences

 
Yi Zhang, Hengchao Zhao, Zheng Zhang and Hongbo Wang    
Addressing the automatic berthing task for vessels, this study introduces the Flow Matching Double Section Bezier Berth Method (FM-DSB) for handling downstream and upstream berthing instructions. By considering the orientation relationship between the di... ver más

 
Weiqiang Liao, Xin Dong, Rongfeng Yang and Zhongfei Qiao    
In response to the constant power negative impedance characteristics on the load side of a ship DC microgrid, leading to voltage oscillation issues in the DC bus, this paper proposes a control optimization method based on impedance reshaping using bus vo... ver más