Inicio  /  Water  /  Vol: 9 Núm: 8 Par: 0 (2017)  /  Artículo
ARTÍCULO
TITULO

Characterization and Treatment Proposals of Shipboard Slop Wastewater Contaminated by Hydrocarbons

Riccardo Campo    
Maria Gabriella Giustra    
Mauro De Marchis    
Gabriele Freni    
Gaetano Di Bella    

Resumen

Shipboard slop wastewaters are produced by the activity of washing of oil tankers with seawater, and are characterized by high salinity and hydrocarbons. In this context, harbor authorities are forced to respect the international regulation IMO-MARPOL 73/78 and they must treat slop wastewater before discharging to the sea. This study compared data from three stand-alone treatments working with the same real slop wastewater: (1) a chemical treatment of coagulation-flocculation with aluminum sulphate as coagulant and an anionic flocculant (A57), (2) a physical treatment of adsorption on granular activated carbon (GAC), (3) two biological treatments represented by a membrane bioreactor (MBR) and a moving bed biofilm reactor (MB-MBR). GAC treatment registered the highest removal efficiency of total petroleum hydrocarbons (?TPH) next to 85%, since the activated carbon had excellent adsorption properties towards organic substances. The coagulation-flocculation treatment reported the lowest ?TPH ? 57% due to the presence of emulsified hydrocarbons that were not affected by the coagulant and flocculant action, so remaining in liquid phase. ?TPH ? 70% obtained with MB-MBR fed with 100% volume of slop, suggested biomass acclimation to salinity and hydrocarbons. Based on the results of each process, three main treatment chains are proposed depending on the hydrocarbons load of the real slop wastewater.

Palabras claves

 Artículos similares

       
 
Jesús Plácido Medina Salas, Francisco Gamarra Gómez, Elisban Juani Sacari Sacari, Wilson Orlando Lanchipa Ramos, Rocío María Tamayo Calderón, Efracio Mamani Flores, Víctor Yapuchura Platero, Walter Dimas Florez Ponce de León and Elmer Marcial Limache Sandoval    
Arsenic (III) exposure, often from contaminated water, can have severe health repercussions. Chronic exposure to this toxic compound is linked to increased risks of various health issues. Various technologies exist for arsenic (III) removal from contamin... ver más
Revista: Water

 
Yuehan Su, Yongbei Ye, Songwei Lin, Yaobin Lu, Haiping Luo and Guangli Liu    
The aim of this study was to synthesize N, P codoped CQDs modifying TiO2/g-C3N4 nanorod array (i.e., N, P-CQD/TCN NA) photoanodes for the degradation of 1,4-dioxane (1,4-D) and to explore the possibility of the photoelectrocatalytic (PEC) process in wast... ver más
Revista: Water

 
Loris Barillari, Augusto Della Torre, Gianluca Montenegro and Angelo Onorati    
In the last decade, additive manufacturing (AM) techniques have been progressively applied to the manufacturing of many mechanical components. Compared to traditional techniques, this technology is characterized by disruptive potential in terms of the co... ver más
Revista: Applied Sciences

 
Xiaoyi Lou, Yifan Sui, Qichao Zhang, Changling Fang, Yunyu Tang, Xuan Zhang, Guangxin Yang, Yongfu Shi, Dongmei Huang, Jie Guan and Yaoguang Guo    
The removal of decabromodiphenyl ether (BDE 209), as a typical persistent organic pollutant (POP), is of worldwide concern. Mechanochemical (MC) processes are promising methods to degrade environmental pollutants, most of which use a single grinding reag... ver más
Revista: Applied Sciences

 
Jean Flores-Gómez, Mario Villegas-Ruvalcaba, José Blancas-Flores and Juan Morales-Rivera    
In this study, a novel chitosan?resole?pectin aerogel (CS?R?P) was created from a sol?gel reaction with a solution of Cs and P with resole by a freeze-drying technique, and this adsorbent was proposed for the removal of methylene blue (MB). In addition, ... ver más
Revista: ChemEngineering