|
|
|
|
|
Ruilin Liu, Yunqi Liu, Hongming Liu, Yuanxing Li, Hui Chen and Zongtao Zhu
Laser?MIG hybrid welding?brazing was used to weld 304 stainless steel and 6061-T6 aluminum alloy with a thickness of 2 mm. The microstructure, morphology, chemical composition and corrosion behavior of the samples after high-temperature oxidation were in...
ver más
|
|
|
|
|
|
|
|
|
|
|
Hongzhang Pan, Yongmei Zhu and Mingjiang Fang
Maraging steel is the material of deep sea pressure equipment. The characteristics of corrosion fatigue crack initiation in 18Ni (250) were investigated by performing a tensile fatigue test under different loading conditions. The mechanism of corrosion f...
ver más
|
|
|
|
|
|
|
|
|
|
|
Hee-Seon Bang, Jong-Chan Kim, Bum-Su Go, Dong-Won Choi and Hyo-Sung Kim
Recently, for the high performance of automobiles, the application ratio of zinc-coated steel sheets with excellent corrosion resistance has been increasing. However, it is difficult to achieve sound welds, as porosities form from zinc during welding. In...
ver más
|
|
|
|
|
|
|
|
|
|
|
Sayako Kodera, Leander Schmidt, Florian Römer, Klaus Schricker, Saichand Gourishetti, David Böttger, Tanja Krüger, András Kátai, Benjamin Straß, Bernd Wolter and Jean Pierre Bergmann
With the increasing power and speed of laser welding, in-process monitoring has become even more crucial to ensure process stability and weld quality. Due to its low cost and installation flexibility, acoustic process monitoring is a promising method and...
ver más
|
|
|
|
|
|
|
|
|
|
|
Jiyeon Shim and Illsoo Kim
The Magnetic Pulse Welding (MPW) process uses only electromagnetic force to create a solid-state metallurgical bond between a working coil and outer workpiece. The electromagnetic force drives the outer tube to collide with the inner rod, resulting in su...
ver más
|
|
|
|
|
|
|
|
|
|
|
Norimitsu Okuyama, Kazufumi Nomura, Tomokazu Sano, Keiji Kadota, Seiya Nitta, Tetsuo Era and Satoru Asai
Blowholes caused by vaporization of the galvanized layer are a problem with galvanized steel sheets, which use lap joint welding. The laser ultrasonic method is the possible solution to realize the desirable 100% inspection instead of the conventional sa...
ver más
|
|
|
|
|
|
|
|
|
|
|
Klaus Schricker, Leander Schmidt, Hannes Friedmann and Jean Pierre Bergmann
The development of adaptive and intelligent clamping devices allows for the reduction of rejects and defects based on weld discontinuities in laser-beam welding. The utilization of fixture-integrated sensors and actuators is a new approach, realizing ada...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yongjian Liu, Jiangjiang Li, Lei Jiang, Jianping Xian, Haotian Li, Yadong Zhao and Yunxia Gong
In terms of load transfer, the design of the joints in concrete-filled steel tubular (CFST) arch bridges is more critical than that in buildings due to the higher likelihood of steel?concrete-interface debonding. To improve the contact at the steel?concr...
ver más
|
|
|
|
|
|
|
|
|
|
|
Mohsin Iqbal, Saravanan Karuppanan, Veeradasan Perumal, Mark Ovinis and Adnan Rasul
Exposure to load and offshore environment degrades the load-bearing capacity of tubular joints, necessitating reinforcement of these joints. Reinforcement is sometimes required for lifespan enhancement or qualification based on new requirements. Availabl...
ver más
|
|
|
|
|
|
|
|
|
|
|
Shoaib Ahmed, Rana Atta ur Rahman, Awais Awan, Sajjad Ahmad, Waseem Akram, Muhammad Amjad, Mohd Yazid Yahya and Seyed Saeid Rahimian Koloor
Friction stir welding (FSW) is one of the primary fabrication techniques for joining different components, and it has become popular, especially in aluminum alloy structures for marine applications. The welded joint with the friction stir process greatly...
ver más
|
|
|
|
|
|