|
|
|
|
|
Dunhui Xu, Fang Wang, Shengji Li, Xuefeng Huang, Heping Li and Yanhui Guo
To solve the problems associated with micron-sized aluminum (Al), including sintering, agglomeration, and slag deposition during the combustion of aluminized propellants, aluminum?lithium (Al-Li) alloy, prepared by introducing a small amount of Li (1.0 w...
ver más
|
|
|
|
|
|
|
|
|
|
|
Weiqiang Xiong, Yunjie Liu, Tianfu Zhang, Shixi Wu, Dawen Zeng, Xiang Guo and Aimin Pang
Aluminium?lithium alloy (Al?Li alloy) powder has excellent ignition and combustion performance. The combustion product of Al?Li alloy powder combined with ammonium perchlorate is gaseous at the working temperature of solid rocket motors, which greatly re...
ver más
|
|
|
|
|
|
|
|
|
|
|
Xin Ma, Lei Zheng, Zifu Li, Lingling Zhang, Shikun Cheng and Xuemei Wang
This study explored the nitrate reduction by Al-Fe alloy. The nitrate conversions of fresh, 30-day and 90-day alloys were 78.1%, 42.8% and 9.5%, respectively. Water activation promoted the reducing ability of the alloy (98% nitrate removal), which was hi...
ver más
|
|
|
|
|
|
|
|
|
|
|
Rin Takada, Kota Hirasawa, Hideaki Takahashi and Makoto Chiba
Recently, new surface treatments for the corrosion protection of Al alloys by forming self-healing layers have attracted the attention of many researchers. The authors of this paper have previously developed self-healing polyurethane coatings with micro-...
ver más
|
|
|
|
|
|
|
|
|
|
|
Zhaobin Liu, Jiaxin Li, Haoping Peng, Aijun Xie and Zhiwei Li
The effect of Mg addition on the microstructure and sacrificial anode protection performance of a hot-dip Al-5Zn-4Si-xMg coating was studied by scanning electron microscopy (SEM-EDS), an X-ray diffractometer, and an electrochemical workstation. The resul...
ver más
|
|
|
|
|
|
|
|
|
|
|
Junjie Cai, Shengpeng Hu, Hongbing Liu, Danyang Lin, Wei Fu and Xiaoguo Song
Dissimilar materials brazing of Ti2AlNb alloy to GH99 superalloy is of great pragmatic importance in the aerospace field, especially the lightweight space aircraft components manufacturing. In this work, TiZrCuNi amorphous filler alloy was used as brazin...
ver más
|
|
|
|
|
|
|
|
|
|
|
Roya Malekkhouyan, Yoann Paint, Loïc Prince, Maurice Gonon and Marie-Georges Olivier
In the present study, Mg-Al layered double hydroxide (Mg-Al/LDH) was synthesized on the surface of AZ31 Mg alloy substrate via in-situ hydrothermal treatment. Synthesis parameters were changed to determine their effect on the lateral size of LDH. For thi...
ver más
|
|
|
|
|
|
|
|
|
|
|
Anastasiia N. Petrova, Dmitry Y. Rasposienko, Irina G. Brodova, Liudmila A. Yolshina, Roman V. Muradymov, Artem A. Markin, Vyacheslav V. Marchenkov and Bogdan M. Fominykh
Composites based on Al-Fe alloys and reinforced with three-layer graphene sheets were synthesized ?in situ? under a layer of molten salts. Composites containing 0.12 wt.% graphene were subjected to severe plastic deformation via high-pressure torsion. SE...
ver más
|
|
|
|
|
|
|
|
|
|
|
Fernanda Martins Queiroz, Aline de Fátima Santos Bugarin, Victor Hugo Ayusso, Maysa Terada and Isolda Costa
The AA 2198-T851 is a third-generation Al-Li alloy developed for use in the aircraft industry. Al-Li alloys are susceptible to localized corrosion due to their complex microstructure resulting from the used thermomechanical treatment. In order to prevent...
ver más
|
|
|
|
|
|
|
|
|
|
|
Shuai Zhang, Mengcheng Gong, Ling Cen, Yang Lu and Ming Gao
Hybrid wire arc additive-milling subtractive manufacturing (HWMM) is an effective way to improve the quality of complex metal components, but the difference in the properties of the aluminum alloy and magnesium alloy fabricated by HWMM has been not addre...
ver más
|
|
|
|
|
|