|
|
|
Hao Deng, Hong-Bin Peng and Wei Chang
Corrugated web girders with plate flanges have been widely applied in buildings and bridges due to the large shear capacity of the corrugated web (CW). However, experiments on corrugated web girders with tubular flanges are limited. Accordingly, this pap...
ver más
|
|
|
|
|
|
|
Liang Yang, Miaoer Liu, Yun Liu, Tao Zhang, Hailong Lu, Qingzhen Lu and Jun Yan
A cryogenic hose is used to transport liquefied natural gas at sea, where flexible fittings are sealed by corrugated lining and end flange welding. However, the extreme cryogenic temperatures of the conveyed fluid introduce substantial challenges to the ...
ver más
|
|
|
|
|
|
|
Ali Ghamari, Chanachai Thongchom, Ramadhansyah Putra Jaya and Thandiwe Sithole
Concentrically braced frame (CBF) systems are susceptible to buckling (which causes a decrease in energy absorption), although this system has considerable lateral stiffness and strength. To over this shortcoming, researchers have suggested the use of I-...
ver más
|
|
|
|
|
|
|
Xiaoxia Zheng, Yu Zou, Bohan He, Jixin Xiang, Zhiqiang Li and Qiao Yang
The buckling failure of the afterburner cylinder is a serious safety concern for aero-engines. To tackle this issue, the buckling simulation analysis of the afterburner cylinder was carried out by using finite element method (FEM) software to obtain the ...
ver más
|
|
|
|
|
|
|
Hao Qi, Shaowei Hu, Xiang Xue, Changxi Shan, Wenhao Li, Yajia Wang and Peiyi Wang
To prevent brittle damage and improve the post-earthquake rapid repair capability of beam-column connections, a precast reduced beam section (PRBS) connection joint that can be rapidly repaired under earthquake action was proposed in this study. Four spe...
ver más
|
|
|
|
|
|
|
Guan-Yuan Zhao, Wei Liu, Rui Su and Jia-Cheng Zhao
A beam finite element model considering the slip, shear lag, and time-dependent effects of steel?concrete composite box beams have been proposed in this study. The element is employed to a one-dimensional analytical method that is solved involving an exp...
ver más
|
|
|
|
|
|
|
Yan Chen, Liyuan Chen and Wuli Chu
According to the discontinuous structural characteristics of a gas turbine, by considering the contact thermal resistance of the rough surface, a contact thermal resistance measurement experiment was conducted in this study. The main objectives of this w...
ver más
|
|
|
|
|
|
|
Zhiqiang Xu, Yunxian Cui, Baoliang Li, Ketong Liu, Feiting Shi and Peng Cao
A fatigue test on the failure mode of flange shafts was conducted. The propagation characteristics of the initial crack at the junction between the shaft and the flange as well as its angle effect were studied. This study developed an analysis program of...
ver más
|
|
|
|
|
|
|
Pengpeng Wang, Haixia Gong, Liquan Wang, Feihong Yun, Yibo Nan, Ming Ju, Chao Li, Honghai Wang and Kai Xu
A deep-water bolt flange automatic connection tool plays a very important role in the process of offshore oil exploitation and transportation. In the connection process, the alignment error of bolts and nuts is the key factor to ensure the connection pro...
ver más
|
|
|
|
|
|
|
Weicheng Sun, Zhenqun Guan, Yan Zeng, Jiacheng Pan and Zhonghai Gao
This paper designed a bolt-loosening Support Vector Machines? conduct detection method with feature vectors comprising eigenvalue decomposition based on Variational Modal Decomposition (VMD) and Singular Value Decomposition (SVD), combined with permutati...
ver más
|
|
|
|