|
|
|
|
|
Huayang Yu, Yihao Deng, Guansen Deng and Niya Dong
Fatigue failure in asphalt pavements, caused by continuous loading, primarily occurs at the interface between the asphalt binder and the aggregate (adhesive failure) or within the asphalt binder itself (cohesive failure). This study conducted variable st...
ver más
|
|
|
|
|
|
|
|
|
|
|
Ayman El-Zohairy, Hani Salim, Hesham Shaaban and Mahmoud T. Nawar
Fatigue in steel?concrete composite beams can result from cyclic loading, causing stress fluctuations that may lead to cumulative damage and eventual failure over an extended period. In this paper, the experimental findings from fatigue loading tests on ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Kun Zhang, Pengbo Chang, Jianxi Ren, Zheng Liu and Ke Wang
The fractured rock mass in the western cold region is affected by freezing and thawing disasters and is prone to local damage and fracture along the fissures? ends. The fatigue damage induced by repeated frost heave and traffic loads seriously endangers ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Hongzhang Pan, Yongmei Zhu and Mingjiang Fang
Maraging steel is the material of deep sea pressure equipment. The characteristics of corrosion fatigue crack initiation in 18Ni (250) were investigated by performing a tensile fatigue test under different loading conditions. The mechanism of corrosion f...
ver más
|
|
|
|
|
|
|
|
|
|
|
Aliyye Kara, Ibrahim Eksin and Ata Mugan
The design optimization of structures can be conducted in either the time domain or the frequency domain. The frequency domain approach is advantageous compared to its time domain counterpart, especially if the degree of freedom is large, the objectives ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Nikola Ilankovic, Dragan ?ivanic and Ninoslav Zuber
|
|
|
|
|
|
|
|
|
|
|
Davide Pederbelli, Luca Goglio, Davide Paolino, Massimo Rossetto and Andrea Tridello
Modern structures are designed to withstand in-service loads over a broad frequency spectrum. Nonetheless, mechanical properties in numerical codes are assumed to be frequency-independent to simplify calculations or due to a lack of experimental data, an...
ver más
|
|
|
|
|
|
|
|
|
|
|
Abdulnaser M. Alshoaibi and Abdullateef H. Bashiri
The objective of this study is to examine the behavior of fatigue crack growth (FCG) in the mixed mode (I/II) of the AISI 316 austenitic stainless steel alloy, considering mode mixity angles of 30°, 45°, and 60°. This particular alloy is widely used in t...
ver más
|
|
|
|
|
|
|
|
|
|
|
Murat Demiral, Fethi Abbassi, Abolfazl Zahedi and Salih Akpinar
Single shear or single lap joints are the most prevalent type of adhesive joints used in advanced engineering applications, where they are exposed to fatigue loadings in their services. Although their mechanical performances under static loading have bee...
ver más
|
|
|
|
|
|
|
|
|
|
|
Murat Demiral, Fethi Abbassi, Riaz Muhammad and Salih Akpinar
Bonded joints used in wing sections and frames of aircraft structures are mostly exposed to cyclic loadings instead of static ones during their services. Bending types of dynamic loadings are mostly encountered. In this study, the fatigue response of a s...
ver más
|
|
|
|
|
|