|
|
|
|
|
Jason Cornelius, Sven Schmitz, Jose Palacios, Bernadine Juliano and Richard Heisler
This work details the development and validation of a methodology for high-resolution rotor models used in hybrid Blade Element Momentum Theory Unsteady Reynolds Averaged Navier?Stokes (BEMT-URANS) CFD. The methodology is shown to accurately predict sing...
ver más
|
|
|
|
|
|
|
|
|
|
|
Koichiro Hirose, Koji Fukudome, Hiroya Mamori and Makoto Yamamoto
Ice crystal icing occurs in jet engine compressors, which can severely degrade jet engine performance. In this study, we developed an ice crystal trajectory simulation, considering the state changes of ice crystals with a forced convection model, indicat...
ver más
|
|
|
|
|
|
|
|
|
|
|
Haobin Wen, Long Zhang and Jyoti K. Sinha
On top of the condition-based maintenance (CBM) practice for rotating machinery, the robust estimation of remaining useful life (RUL) for rolling-element bearings (REB) is of particular interest. The failure of a single bearing often results in secondary...
ver más
|
|
|
|
|
|
|
|
|
|
|
Wenping Luo, Weiqin Liu, Meng Yang, Shuo Chen, Xuemin Song and Weiguo Wu
Operating Offshore Floating Vertical Axis Wind Turbines (OF-VAWT) have the potential to perform well in the deep-sea area. Some researchers gave performance prediction by developing simplified computing models. However, these models have imperfections in...
ver más
|
|
|
|
|
|
|
|
|
|
|
Wenhui Yan, Zhaozheng Sun, Junwei Zhou, Kun Zhang, Jiahui Wang, Xiao Tian and Junqian Tian
One of the most commonly used techniques in aerospace engineering is the RANS (Reynolds average Navier?Stokes) approach for calculating the transonic compressor flow field, where the accuracy of the computation is significantly affected by the turbulence...
ver más
|
|
|
|
|
|
|
|
|
|
|
Pu Yang, Zhiqing Zhang, Huiling Geng, Bin Jiang and Xukai Hu
This paper introduces a novel intelligent sliding mode predictive fault-tolerant control method based on the Dynamic Information Exchange Coyote Optimization Algorithm (DIECOA), which is applied to a quad-rotor UAV system with multi-delay and sensor faul...
ver más
|
|
|
|
|
|
|
|
|
|
|
Muhammad Umer Sohail, Hossein Raza Hamdani, Asad Islam, Khalid Parvez, Abdul Munem Khan, Usman Allauddin, Muhammad Khurram and Hassan Elahi
Development of a transonic compressor instability prediction tool under distorted inlet flow conditions using extensive CFD runs for a supervised learning dataset. ANN with optimal algorithm and different regression learning has been selected to produce ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Ji Hyeok Kim and Joon Ahn
In a field test of a hybrid desiccant cooling system (HDCS) linked to a gas engine cogeneration system (the latter system is hereafter referred to as the combined heat and power (CHP) system), in the cooling operation mode, the exhaust heat remained and ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Abdallah Samad, Eric Villeneuve, Caroline Blackburn, François Morency and Christophe Volat
Successful icing/de-icing simulations for rotorcraft require a good prediction of the convective heat transfer on the blade?s surface. Rotorcraft icing is an unwanted phenomenon that is known to cause flight cancelations, loss of rotor performance and se...
ver más
|
|
|
|
|
|
|
|
|
|
|
Roberto Agromayor and Lars O. Nord
Axial turbines are the most common turbine configuration for electric power generation and propulsion systems due to their versatility in terms of power capacity and range of operating conditions. Mean-line models are essential for the preliminary design...
ver más
|
|
|
|
|
|