|
|
|
|
|
Jiyang Wang, Dan Yu, Chen Zeng, Xiaohua Ji, Lingpeng Ye, Pinghuai Zhou and Senlin Zhao
To examine the flexural toughness characteristics of textile-reinforced lightweight aggregate concrete (TRLC), a four-point bending test was conducted to assess the impact of varying numbers of textile layers and the inclusion of hydroxypropyl methylcell...
ver más
|
|
|
|
|
|
|
|
|
|
|
Seyed Fathollah Sajedi, Iman Saffarian, Masoud Pourbaba and Jung Heum Yeon
This paper presents experimental and theoretical assessments of the structural behavior of circular steel fiber-reinforced concrete (SFRC) columns reinforced with glass fiber-reinforced polymer (GFRP) bars subjected to a concentric axial compressive load...
ver más
|
|
|
|
|
|
|
|
|
|
|
Jiaqi Hu, Yin Gu, Jinhuang Yan, Ying Sun and Xinyi Huang
With the convenient and fast requirements for construction in bridge engineering, prefabricated assembly technology is widely applied in engineering construction. Typically, prefabricated bridge decks are connected through cast-in-place wet joints. Wet j...
ver más
|
|
|
|
|
|
|
|
|
|
|
Alejandro Pérez Caldentey, Yolanda G. Diego, Anastasio P. Santos, Lina López, María Chiquito and Ricardo Castedo
Within the research project ITSAFE, two full-scale structures were built, one consisting of a single-storey, two-span, 7.00 × 14.00 m2 RC frame with a solid slab and another consisting of a two-storey, 7.00 × 7.00 m2 RC frame with solid slabs. In the two...
ver más
|
|
|
|
|
|
|
|
|
|
|
Andrea Armonico, Laurent Michel, Mohamed Saidi and Emmanuel Ferrier
This paper examines the cracking behaviour of reinforced concrete beams strengthened by externally bonded fiber-reinforced polymer. The crack opening of RC structures is a key parameter for the durability of concrete structures. It is of vital importance...
ver más
|
|
|
|
|
|
|
|
|
|
|
Jiuzhi Fu, Yang Zhang and Yanyue Qin
In this investigation, the effects of different fabrics with 0.20% carbon fiber textile (CFT), 0.21% glass fiber textile (GFT), and 0.25% basalt fiber textile (BFT) on the properties of TR-UHPC were investigated by axial tensile tests. A bending test of ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Michael Frenzel, Enrico Baumgärtel, Steffen Marx and Manfred Curbach
This article presents the cracking and load-bearing behaviour of carbon-reinforced prismatic concrete tensile specimens. Grids with different geometries and impregnations were used as carbon reinforcement. In addition, the roving surfaces were partially ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Zhenhua Ren, Hui Wang, Lizheng Fang, Peng Ding and Xiantao Zeng
Stainless steel has the characteristics of oxidation resistance, high temperature resistance, corrosion resistance, high strength, and high yield ratio. The use of stainless steel bars can extend the life of a structure, reduce later maintenance costs, a...
ver más
|
|
|
|
|
|
|
|
|
|
|
Sipho G. Thango, Georgios E. Stavroulakis and Georgios A. Drosopoulos
A numerical investigation of masonry walls subjected to blast loads is presented in this article. A non-linear finite element model is proposed to describe the structural response of the walls. A unilateral contact?friction law is used in the interfaces ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Zizhang Dong, Huadong Peng, Kun Wang and Tao Liu
Due to the complex hydrogeological conditions in coastal regions, the use of internal bracing systems is necessary for supporting coastal foundation pits. This paper introduces a novel prefabricated foundation pit bracing system based on Hollow Concrete-...
ver más
|
|
|
|
|
|