|
|
|
|
|
Jiyang Wang, Dan Yu, Chen Zeng, Xiaohua Ji, Lingpeng Ye, Pinghuai Zhou and Senlin Zhao
To examine the flexural toughness characteristics of textile-reinforced lightweight aggregate concrete (TRLC), a four-point bending test was conducted to assess the impact of varying numbers of textile layers and the inclusion of hydroxypropyl methylcell...
ver más
|
|
|
|
|
|
|
|
|
|
|
Jiuzhi Fu, Yang Zhang and Yanyue Qin
In this investigation, the effects of different fabrics with 0.20% carbon fiber textile (CFT), 0.21% glass fiber textile (GFT), and 0.25% basalt fiber textile (BFT) on the properties of TR-UHPC were investigated by axial tensile tests. A bending test of ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Emin Mercan
This study aimed to determine the effects of the ozone treatment of film-forming solutions (FFSs) containing whey protein concentrate (WPC) and gelatine on biopolymer films? physical, mechanical, and thermal properties. Film samples were produced from a ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yadong Zheng, Lianying Zhang, Peng Wu, Xiaoqian Guo, Ming Li and Fuqiang Zhu
The physical and mechanical properties of rocks change significantly after being subjected to high temperatures, which poses safety hazards to underground projects such as coal underground gasification. In order to investigate the effect of temperature o...
ver más
|
|
|
|
|
|
|
|
|
|
|
Lijun Ma, Meng Sun and Yunlong Zhang
In order to facilitate waste glass recycling and enable the monitoring of concrete structures, this study prepares a new type of self-sensing engineered cementitious composite (ECC) via the use of glass sand instead of silica sand. The health monitoring ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Brendan C. O?Kelly, Jacinto Alonso-Azcárate and José Manuel Moreno-Maroto
The remolding toughness property of fine-grained soil has not been investigated that much, mainly because it has not lent easily to direct measurement, with soil toughness usually qualitatively described. In practical terms, as the plastic limit wP is ap...
ver más
|
|
|
|
|
|
|
|
|
|
|
Guohui Zhang, Xinlan Ni, Xiong Wei, Zhendong Yang and Yanshuang Gu
Saturated concrete is significantly different from dry concrete in fracture mechanical properties. Using the wedge-splitting tensile method to research the rule of change in moisture content, double-K fracture toughness and fracture energy of three stren...
ver más
|
|
|
|
|
|
|
|
|
|
|
Dan Wang, Jialing Che, Haifeng Liu and Siew Choo Chin
Economical desert sand engineered cementitious composites (DS-ECCs) using a mixture of cement, fly ash, local desert sand, water, low-cost PVA fibers, and chemical additives were developed, aiming for a further enhancement in ductility and toughness. The...
ver más
|
|
|
|
|
|
|
|
|
|
|
Grzegorz Ludwik Golewski
This work presents a discussion of the basic properties of broken mineral limestone aggregates with the specification of the properties affecting the fracture toughness of concretes made with these aggregates. To determine the influence of the grain-size...
ver más
|
|
|
|
|
|
|
|
|
|
|
Liangliang Li, Xin Pan, Biao Liu, Bin Liu, Pengfei Li and Zhifeng Liu
To investigate the impact of various heat treatments on the strength and toughness of TA15 aviation titanium alloys, five different heat treatment methods were employed in the temperature range of 810?995 °C. The microstructure of the alloy was examined ...
ver más
|
|
|
|
|
|