40   Artículos

 
en línea
Ranran Huang, Tao Xue and Jie Wu    
A two-point cylindrical-focused laser differential interferometer (2P-CFLDI) system and a conventional Z-type Schlieren were used to measure the hypersonic turbulent boundary layer on a flat plate at Mach number Ma = 6 and Reynolds number Re = 1.08 × 106... ver más
Revista: Aerospace    Formato: Electrónico

 
en línea
Yanxin Yin, Ruiyang Lu, Jianxin Liu and Zhangfeng Huang    
Temperatures within the boundary layers of high-enthalpy hypersonic flows can soar to thousands or even tens of thousands of degrees, leading to significant real gas phenomena. Although there has been significant research on real gas effects on hypersoni... ver más
Revista: Aerospace    Formato: Electrónico

 
en línea
Bo Yang, Hesen Yang, Ning Zhao, Hua Liang, Zhi Su and Dongsheng Zhang    
The double-wedge configuration is a typical characteristic shape of the rudder surface of high-speed aircraft. The impact of the shock wave/boundary layer interaction and the shock wave/shock wave interaction resulting from the double wedge on aircraft a... ver más
Revista: Aerospace    Formato: Electrónico

 
en línea
Yanxin Yin, Yinglei Jiang, Shicheng Liu and Hao Dong    
Experimental and linear stability theory (LST) investigation of boundary layer transition on a flat plate was conducted with a flow of Mach number 5. The temperature distributions and second-mode disturbances on the flat plate surface at different unit R... ver más
Revista: Applied Sciences    Formato: Electrónico

 
en línea
Xinyi Liu, Zhenbing Luo, Qiang Liu, Pan Cheng and Yan Zhou    
Transition delaying is of great importance for the drag and heat flux reduction of hypersonic flight vehicles. The first mode, with low frequency, and the second mode, with high frequency, exist simultaneously during the transition through the hypersonic... ver más
Revista: Aerospace    Formato: Electrónico

 
en línea
Giannino Ponchio Camillo, Alexander Wagner, Takahiko Toki and Carlo Scalo    
This work investigates a hypersonic turbulent boundary layer over a 7°" role="presentation">7°7° 7 ° half angle cone at a wall-to-total temperature ratio of 0.1, M∞=7.4" role="presentation">??8=7.4M8=7.4 M 8 = 7.4 and Re∞... ver más
Revista: Aerospace    Formato: Electrónico

 
en línea
Simin Gao, Hexia Huang, Yupeng Meng, Huijun Tan, Mengying Liu and Kun Guo    
In this paper, a novel flow perturbation model meant to investigate the effects of incoming wind shear on a hypersonic inlet/isolator is presented. This research focuses on the transient shock/boundary layer interaction and shock train flow evolution in ... ver más
Revista: Aerospace    Formato: Electrónico

 
en línea
Eugene N. A. Hoffman, Elijah J. LaLonde, Angelina Andrade, Ivana Chen, Hayden A. Bilbo and Christopher S. Combs    
The characterization of a hypersonic impulse facility is performed using a variety of methods including Pitot probe scans, particle image velocimetry, and schlieren imaging to verify properties such as the velocity, Mach number, wall boundary layer thick... ver más
Revista: Aerospace    Formato: Electrónico

 
en línea
Bo Yang, Hesen Yang, Chuanbiao Zhang, Ning Zhao, Hua Liang and Dongsheng Zhang    
Compression corner shock wave/boundary layer interaction (SWBLI) is a typical shock wave/boundary layer interaction (SWBLI) problem in supersonic/hypersonic flows. In previous studies, the separation flow is usually caused by a single shock wave. However... ver más
Revista: Aerospace    Formato: Electrónico

 
en línea
John-Paul Mosele, Andreas Gross and John Slater    
Shock wave boundary layer interactions are common to both supersonic and hypersonic inlet flows. Wall-resolved implicit large-eddy simulations of a canonical Mach 2.5 axisymmetric shock wave boundary layer interaction experiment at Glenn Research Center ... ver más
Revista: Aerospace    Formato: Electrónico

« Anterior     Página: 1 de 2     Siguiente »