|
|
|
|
|
Julia Mrotzek and Wolfgang Viöl
Cold plasma spray, a powder deposition method by means of an atmospheric pressure plasma jet is a promising coating technology for use on temperature sensitive surfaces. For further improvement of this coating process, a deeper understanding of its therm...
ver más
|
|
|
|
|
|
|
|
|
|
|
Airingas ?uopys, Viktorija Grigaitiene, Liutauras Marcinauskas, Romualdas Ke?elis, Rolandas Uscila and Mindaugas Aikas
In this study, alumina coatings were formed using atmospheric plasma spraying, increasing the torch power from 29.4 to 45.1 kW. The surface morphology of the coatings was determined using scanning electron microscopy; the elemental composition was examin...
ver más
|
|
|
|
|
|
|
|
|
|
|
Szymon Kowalski, Weronika Gonciarz, Radoslaw Belka, Anna Góral, Magdalena Chmiela, Lukasz Lechowicz, Wieslaw Kaca and Wojciech Zórawski
Air plasma spraying (APS) is a common method of producing hydroxyapatite (HA) coatings for alloprosthetic implants. Modification of HA spraying potentially may diminish the risk of inflammation and local infection during bone implantation. Titanium impla...
ver más
|
|
|
|
|
|
|
|
|
|
|
Lukas Bastakys, Liutauras Marcinauskas, Mindaugas Milie?ka, Matas Grigaliunas, Sebastjan Matkovic and Mindaugas Aikas
Cr2O3 and Cr2O3?SiO2-TiO2 coatings are deposited on P265GH steel using atmospheric plasma spraying. The influence of silicon oxide?titanium oxide addition on the surface morphology of the coatings, phase composition and tribological properties under non-...
ver más
|
|
|
|
|
|
|
|
|
|
|
Pavel Ctibor, Josef Sedlácek and Libor Straka
Various kinds of natural garnets belonging to the almandine type (3FeO·Al2O3·3SiO2) were sprayed by plasma spray technique to build coatings on metallic substrates. The experimental garnet powders came from different mines in the Czech Republic and Mongo...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yongsheng Liao, Yue Cheng, Zhongyu Zhuang, Rongjun Li, Yuan Yu, Ruixue Wang and Zhiwei Jiao
The most common and easy approach to fabricating flexible strain sensors is based on the deposition principle. To improve the design of the sensing layer pattern, the reproducibility of the process and the sensitivity of the sensor, a controllable low-te...
ver más
|
|
|
|
|
|
|
|
|
|
|
Sneha Samal, Ondrej Tyc, Jan Cizek, Jakub Klecka, Franti?ek Lukác, Orsolya Molnárová, Esther de Prado, Zdenek Weiss, Jaromír Kopecek, Ludek Heller, Petr ?ittner and Tomá? Chráska
Thick NiTi shape memory alloy coatings (300?500 µm) were produced on graphite and AISI 304 substrates by radio frequency inductively-coupled plasma spray technology (RF-ICP) from feedstock NiTi powders. Their microstructure as well as chemical and phase ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yu Wang, Qi Liu, Quansheng Zheng, Tianqing Li, Nanjing Chong and Yu Bai
The thermal insulation properties of thermal barrier coatings (TBCs) can be significantly improved with increasing the coating thickness. However, due to the weak bonding of high-thickness TBCs, the low reliability and short lifetime greatly limits their...
ver más
|
|
|
|
|
|
|
|
|
|
|
Faranak Barandehfard, James Aluha and François Gitzhofer
Thermal spraying of aluminum nitride (AlN) is a challenging issue because it decomposes at a high temperature. In this work, the use of suspension plasma spray (SPS) technology is proposed for the in situ synthesis and deposition of cubic-structured AlN ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Rachele Sergi, Devis Bellucci and Valeria Cannillo
Bioactive glasses are promising biomaterials for bone and tissue repair and reconstruction, as they were shown to bond to both hard and soft tissues stimulating cells towards a path of regeneration and self-repair. Unfortunately, due to their relatively ...
ver más
|
|
|
|
|
|