|
|
|
|
|
Ruilin Liu, Yunqi Liu, Hongming Liu, Yuanxing Li, Hui Chen and Zongtao Zhu
Laser?MIG hybrid welding?brazing was used to weld 304 stainless steel and 6061-T6 aluminum alloy with a thickness of 2 mm. The microstructure, morphology, chemical composition and corrosion behavior of the samples after high-temperature oxidation were in...
ver más
|
|
|
|
|
|
|
|
|
|
|
Jaehui Bang and Eunkyung Lee
In this study, the surface properties of marine structures were improved by applying a twin wire arc spray process to high-strength low alloys. The effect of Al and Mo contents in Ni-Al coatings on their mechanical and corrosion behaviors was analyzed us...
ver más
|
|
|
|
|
|
|
|
|
|
|
Amanda Leong, Steven Derek Rountree and Jinsuo Zhang
This research article explores the potential of optical fibers as sensors, highlighting their ability to measure various parameters such as temperature, pressure, stress, and radiation dose. The study focuses on investigating the material compatibility o...
ver más
|
|
|
|
|
|
|
|
|
|
|
Zhenhua Ren, Hui Wang, Lizheng Fang, Peng Ding and Xiantao Zeng
Stainless steel has the characteristics of oxidation resistance, high temperature resistance, corrosion resistance, high strength, and high yield ratio. The use of stainless steel bars can extend the life of a structure, reduce later maintenance costs, a...
ver más
|
|
|
|
|
|
|
|
|
|
|
Abdulnaser M. Alshoaibi and Abdullateef H. Bashiri
The objective of this study is to examine the behavior of fatigue crack growth (FCG) in the mixed mode (I/II) of the AISI 316 austenitic stainless steel alloy, considering mode mixity angles of 30°, 45°, and 60°. This particular alloy is widely used in t...
ver más
|
|
|
|
|
|
|
|
|
|
|
Ying Liu, Lin Wu, Ao Chen, Chang Xu, Xiaoyu Yang, Yilai Zhou, Zhiyuan Liao, Baoguo Zhang, Ya Hu and Hailiang Fang
Oriented silicon steel is vital for power transformer cores, while the high-temperature annealing process limits the industrialization of environmentally friendly coatings on the surface. In this paper, the high-temperature binders Al(H2PO4)3 solution an...
ver más
|
|
|
|
|
|
|
|
|
|
|
Elisabetta Carella, David Rapisarda and Stephan Lenk
The main components of a liquid breeder blanket in a fusion power reactor are lead lithium alloy (PbLi) and the steel structure in which the liquid is enclosed (EUROFER). Several compatibility tests have shown that structural materials always suffer from...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yan Li, Xi Luo, Ruihao Liu, Ze Yun and Jixiang Zhang
The paper designed an optimized waveguide structure for ultrasonic testing even at a high temperature 500 deg C. With the waveguide structure, an ultrasonic-guided wave testing device was developed. Measurement error increases with temperature if the wav...
ver más
|
|
|
|
|
|
|
|
|
|
|
Zihao Wang and Tetsuo Shoji
Hydrogen plays various roles in metals or at metal?environment interfaces. Well known effects on metals are hydrogen embrittlement, hydrogen enhanced local plasticity, hydrogen enhanced strain-induced vacancy, hydrogen accelerated oxidation, hydrogen-ind...
ver más
|
|
|
|
|
|
|
|
|
|
|
Stefan Ritter and Hans-Peter Seifert
Low-alloy reactor pressure vessel steels have a rather low susceptibility to stress corrosion cracking (SCC) in a boiling water reactor (BWR) environment if the high-temperature water contains no anionic impurities. Recent investigations revealed that un...
ver más
|
|
|
|
|
|