Resumen
In order to solve the problem of low response frequency and poor consistency of conventional yarn grippers in weft accumulators, in this study, a piezoelectric yarn gripper is used instead of conventional yarn grippers and the motion characteristics of its actuator are studied. This gripper uses a bimorph piezoelectric bending actuator with a low-cost, well integrated self-sensing method based on charge measurement. The modeling of the piezoelectric micromanipulator is based on the piezoelectric and Euler?Bernoulli beam equations. The static and dynamic characteristics of the piezoelectric actuator as well as the self-sensing capability were experimentally tested. The experimental results show that the maximum output displacement at the end of the piezoelectric actuator is 834 µm, and the maximum output force is 388 µN at 150 V driving voltage. The stability and consistency of its response are also very good, with a response speed of 24 ms. The self-sensing test of the output force also proved the feasibility of the self-sensing method used, with an error of 0.74%. The piezoelectric yarn gripper studied in this paper is promising for practical clamping applications.