Inicio  /  Water  /  Vol: 15 Par: 20 (2023)  /  Artículo
ARTÍCULO
TITULO

Green Synthesis of Surface Modified Biochar for Simultaneous Removal of Steroidal Hormones and Heavy Metals from Wastewater: Optimisation by Central Composite Design

Sefiu Olaitan Amusat    
Temesgen Girma Kebede    
Edward Ndumiso Nxumalo    
Simiso Dube and Mathew Muzi Nindi    

Resumen

The modification of pristine biochar derived from the waste of sweet prickly pear using the green modification method to produce nano-sized biochar (nanobiochar) for the removal of steroidal hormones and heavy metals from water and wastewater is reported in this study. Based on the characterisation results using FTIR, Raman spectroscopy, and XPS, the material had (COOH), (C=O), and (OH) functional groups typical of graphitic amorphous carbon. The SEM-EDS and XRD results showed that the material was mesoporous and amorphous in nature. The BET analysis results revealed that the surface area significantly increased from 220.1 m2/g to 354.6 m2/g after the modification of the pristine biochar. Based on the TGA-DSC results, the material was thermally stable up to 550 °C. A complete factorial experimental design using Minitab 21 Statistical Software (version 18.1) was employed to optimise the experimental adsorption conditions. The F-values and p-values for the lack-of-fit of the model showed the acceptability and significance of the ANOVA model. The Freundlich adsorption isotherm was found to provide a better fit for the steroid adsorption data than the Langmuir adsorption isotherm, with moderate values of R2 = 0.92 for Langmuir and R2 = 0.95 for Freundlich, as well as maximum adsorption capacities of 14.53 mg/g, 10.58 mg/g, 12.50 mg/g, 5.73 mg/g, 5.63 mg/g, and 9.75 mg/g obtained for estriol, a-oestradiol, ß-oestradiol, testosterone, progesterone, and bisphenol A. Freundlich R2 values were lower than Langmuir R2 values for metal adsorption, with maximum adsorption capacities of 8.58 mg/g, 4.15 mg/g, and 6.95 mg/g obtained for nickel, cadmium, and lead, respectively. The maximum percentage of removal for effluents and influents was between 84?89% and 78?86% for steroid hormones and heavy metals, respectively. The highest removal percentage between 90?95% was obtained for spiked ultrapure water for both steroid hormones and heavy metals. The material exhibited a removal percentage up to 60% after the first four cycles.

 Artículos similares

       
 
Nandipha L. Botha, Karen J. Cloete, Nolubabalo Matinise, Oladipupo M. David, Admire Dube and Malik Maaza    
The application of nanotechnology in antimicrobial and cytotoxicity studies has recently been receiving increased interest. This paper report on the use of Persea americana Mill. (avocado) seed husk to synthesize hydronium jarosite nanoparticles in a fac... ver más
Revista: Applied Sciences

 
Sumira Malik, Shristi Kishore, Archna Dhasmana, Preeti Kumari, Tamoghni Mitra, Vishal Chaudhary, Ritu Kumari, Jutishna Bora, Anuj Ranjan, Tatiana Minkina and Vishnu D. Rajput    
The treatment of wastewater is an expensive and energy-extensive practice that not only ensures the power generation requirements to sustain the current energy demands of an increasing human population but also aids in the subsequent removal of enormous ... ver más
Revista: Water

 
Jeremy Feinstein, Quentin Ploussard, Thomas Veselka and Eugene Yan    
Methods for downstream river flow prediction can be categorized into physics-based and empirical approaches. Although based on well-studied physical relationships, physics-based models rely on numerous hydrologic variables characteristic of the specific ... ver más
Revista: Water

 
Augustine Innalegwu Daniel, Ali Al-Hashimi, Marshall Keyster and Ashwil Klein    
Alternaria alternata is a global fungal pathogen that causes symptoms such as leaf blight and seed rot resulting in economically significant yield losses in different varieties of crops. Green synthesis of nanoparticles is preferred over other methods of... ver más

 
Valeria De Matteis, Loris Rizzello, Mariafrancesca Cascione, Paolo Pellegrino, Jagpreet Singh, Daniela Manno and Rosaria Rinaldi    
The quest for novel nanoscale materials for different applications necessitates that they are easy to obtain and have excellent physical properties and low toxicity. Moreover, considering the ongoing environmental impact of noxious chemical waste product... ver más