Resumen
For the UV?curable waterborne polyurethane acrylate (WPUA) emulsion, the free carboxylic groups in the molecular chains introduced by hydrophilic monomers are the inherent disadvantage. We prepared UV and aziridine dual?cured WPUA (UV/AZ?WPUA) emulsion that the carboxylic groups can be crosslinked by the trifunctional aziridine crosslinking agent, trimethylolpropane tris(2-methyl-1-aziridinepropionate) (Sac?100). The effects of Sac?100 content on the gel fraction, tensile properties, hardness, wear resistance, water resistance, and surface morphology of the cured films and coatings were investigated. The results show that, with the increase of the Sac?100 content, the gel fraction, tensile strength, elongation at break, and toughness of the films increase first and then decrease and the wear weight loss and water absorption ratio gradually decrease; in addition, Sac?100 also has an effect on the surface roughness of the coatings. Through comprehensive evaluation, it is considered that the optimum Sac?100 content is 4 wt% in UV/AZ?WPUA system. With the optimum Sac?100 content, the gel fraction of the coating film is 89.78 wt%, the tensile strength is 34.58 MPa, the elongation at break is 343.64%, the toughness is 65.08 MJ/m3, the wear loss is 4.7 mg, and the equilibrious water?absorption ratio is 11.63 wt%. Compared with the UV?cured film without Sac?100, the tensile strength, toughness, and hardness of the dual?cured films increase by 155.4%, 129.3%, and 25.7%, respectively, and the water absorption ratio decreases by 27.1%.