ARTÍCULO
TITULO

Influence of the Rotor-Driven Perturbation on the Stator-Exit Flow within a High-Pressure Gas Turbine Stage

Paolo Gaetani and Giacomo Persico    

Resumen

In stator?rotor interaction studies on axial turbines, the attention is commonly focused on the unsteady rotor aerodynamics resulting from the periodic perturbations induced by the stator flow structures. Conversely, less interest has been historically attracted regarding the influence of the rotor on the flow released by the stator, correlated to propagation of the blade potential field upstream of the rotor leading edge. In this paper, experiments in the research high-pressure turbine of the Laboratory of Fluid-Machines of the Politecnico di Milano, performed by applying a fast-response aerodynamic pressure probe, alongside fully-3D time-accurate CFD simulations of the flow, are combined with the aim of discussing the rotor-to-stator interaction. While rotating, the rotor induces periodic perturbations on the pressure and velocity field in the stator?rotor gap, altering the evolution of the total quantities and the flow rate discharged by each stator channel and eventually triggering energy-separation effects which result in total pressure and total temperature oscillations in the stator-exit flow. Such oscillations were found to rise up to almost ±10% of the stage total temperature drop.

 Artículos similares

       
 
Manuel Hildebrandt, Corina Schwitzke and Hans-Jörg Bauer    
The literature already contains some experimental, analytical and numerical investigations on the rubbing and hysteresis behaviour of brush seals. What the investigations have in common is that they were carried out with new and uncontaminated seals, or ... ver más

 
Francis Canisius, Shusen Wang, Holly Croft, Sylvain G. Leblanc, Hazen A. J. Russell, Jing Chen and Rong Wang    
A multiple sensor payload for a multi-rotor based UAV platform was developed and tested for measuring land surface albedo and spectral measurements at user-defined spatial, temporal, and spectral resolutions. The system includes a Matrice 600 UAV with an... ver más
Revista: Drones

 
Roberto Agromayor and Lars O. Nord    
Axial turbines are the most common turbine configuration for electric power generation and propulsion systems due to their versatility in terms of power capacity and range of operating conditions. Mean-line models are essential for the preliminary design... ver más

 
Roberta Masci and Enrico Sciubba    
Modern gas turbine firing temperatures (1500?2000 K) are well beyond the maximum allowable blade material temperatures. Continuous safe operation is made possible by cooling the HP turbine first stages, nozzle vanes and rotor blades, with a portion of th... ver más

 
Mei Su, Weiyu Jin, Guanguan Zhang, Weiyi Tang and Frede Blaabjerg    
In the wind energy generation system, the brushless doubly-fed induction machine (BDFIM) has shown significant application potential, since it eliminates the electric brush and slip ring. However, the complicated rotor structure increases the control dif... ver más
Revista: Energies