ARTÍCULO
TITULO

THE IMPACT OF THE RESULTS OF PRODUCTION TESTS OF CARBIDE CUTTING TOOLS HARDENED BY A MAGNETIC-PULSE TREATMENT ON INCREASING THE EFFICIENCY OF THE TECHNOLOGICAL CUTTING PROCESS

?????? ??????????? ?????????    
?????? ????????? ????????    
??? ????????? ???????????    

Resumen

The subject matter of the article is the process of hardening cutting tools for heavy machines. The goal of the work is to increase the operating life, reliability, durability and wear resistance of carbide cutting tools due to magnetic-pulse treatment. The tasks were solved: the main factors affecting the change in wear resistance of a carbide treated with a pulsed magnetic field; the impact of the test results of carbide cutting tools hardened by a magnetic-pulse treatment (MPT) on the productive capacity was studied; the MPT impact on the tool durability indices; the interrelation of the MPT parameters, cutting parameters and production efficiency were studied. The following results were obtained: the production tests of carbide cutting tools showed that magnetic-pulse treatment contributes to improving the wear resistance of cutting tools, reducing the coefficient of durability variations, increasing gamma-percentile stability, reducing the amount of chipping and breakage in the area of tool breaking-in. The MPT application enables optimizing cutting conditions in performance rate, cost of operation and tool expenses. It was found out that under difficult cutting conditions, the cutting mode should be optimized in the depth of cut, taking into account the spread of tool durability. Conclusions. A magnetic-pulse treatment contributed to increasing the stability of tools by 1.2-2.0 times and decreasing the coefficient of durability variations by 1.3-3.1 times. The gamma- percentile stability of tools increased by 1.7 - 2.8 times; the optimum durability went up by 1.4-2 times, the optimal feed ? by 1.15-1.3 times. The dependence of the performance of machining with a cutter after MPT on the magnetic intensity H, on the carbide resistance to rupture , on the amount of cobalt in a carbide  and on the pulse frequency f was determined.

 Artículos similares

       
 
Cyril Bourgenot, Valdis Krumins, David G. Bramall and Abdul M. Haque    
CubeSats, known for their compact size and cost effectiveness, have gained significant popularity. However, their limited size imposes restrictions on the optical aperture and, consequently, the Ground Resolution Distance in Earth Observation missions. T... ver más
Revista: Aerospace

 
Md Easin Hasan and Amy Wagler    
Neuroimaging experts in biotech industries can benefit from using cutting-edge artificial intelligence techniques for Alzheimer?s disease (AD)- and dementia-stage prediction, even though it is difficult to anticipate the precise stage of dementia and AD.... ver más
Revista: AI

 
Alexandre Anesi, Sara Negrello, Marta Checchi, Mattia Di Bartolomeo, Roberta Salvatori, Francesco Cavani, Carla Palumbo and Marzia Ferretti    
In this study, the superiority of piezosurgical devices compared to the reciprocating saw is demonstrated on fresh human samples. Ultrasonic osteotomes showed superior performance, and their cutting features might provide better bone healing and remodeli... ver más
Revista: Applied Sciences

 
Sonia Díaz-Santos, Óscar Cigala-Álvarez, Ester Gonzalez-Sosa, Pino Caballero-Gil and Cándido Caballero-Gil    
This paper introduces a cutting-edge approach that combines facial recognition and drowsiness detection technologies with Internet of Things capabilities, including 5G/6G connectivity, aimed at bolstering vehicle security and driver safety. The delineate... ver más
Revista: Applied Sciences

 
Xianlong Peng and Yikai Wu    
In order to solve the problems of low efficiency and complex cutting tools in conventional face gear machining, this paper presents a machining method of ruled surface face gears with conical cutters and proposes a new pinion to correct deviation and its... ver más
Revista: Applied Sciences