Acceso al sitio web del Consejo de Políticas de Infraestructura

   
ARTÍCULO
TITULO

Effect of Steel Fibers on the Behavior of Over-Reinforced Beams Subjected to Pure Torsion

Gunneswara Rao T.D.    
Rama Seshu D.    
Warnitchai P.    

Resumen

The improvement in torsional properties of reinforced concrete (RC) is becoming extremely important in the modern day constructions. Over the years the steel fiber reinforced concrete (SFRC) is being used for improving cracking characteristics of RC. The present paper deals with the behaviour of over reinforced SFRC members subjected to pure torsional loading. Torsion tests on the 15 reinforced steel fiber reinforced concrete beams revealed that, fiber has noticeable effect on the cracking torque and very little effect on the ultimate torsional strength of the member. However fiber inclusion could improve the torsional toughness of the member.

PÁGINAS
pp. 44 - 51

 Artículos similares

       
 
Wei Zhang, Jialiang Liu, Lin Yang, Xiangyuan Zhang, Heqing Zhang and Fukang Gong    
The mechanical properties of S32760 duplex stainless steel under dynamic loading conditions at high strain rates are significantly different from those under quasi-static conditions. As a result of large strain, high strain rate, and high temperature, th... ver más
Revista: Applied Sciences

 
Huating Chen, Yifan Zhuo, Yubo Jiao and Weigang Bao    
The fatigue safety of cable-girder anchorage structures in cable-stayed bridges under long-term service has attracted much attention. For bridges located in seasonally cold regions, the effect of low-temperature environments should be considered when eva... ver más
Revista: Applied Sciences

 
Nengliang Huang, Ye Tian, Rui Yang, Tonghu Xiao, Hua Li and Xiuyong Chen    
In this study, a nanocrystalline layer composed primarily of martensite phase was prepared on the surface of 304 stainless steel. Furthermore, the martensite phase content in the nanocrystalline layer was adjusted by heat treatment at 500 °C and 550 °C, ... ver más
Revista: Applied Sciences

 
Kritchanan Charoensuk and Thunyaseth Sethaput    
Vibration is challenging and significant in solving engineering problems. The issue of vibration in loaded objects by utilizing a three-dimensional model and experiments. Typically, an object is subjected to a random frequency, which changes the notch sh... ver más
Revista: Applied Sciences

 
Saeed M. Jafarpour, Andrei V. Pipa, Alexander Puth, Anke Dalke, Jürgen Röpcke, Jean-Pierre H. van Helden and Horst Biermann    
Recent technological development of utilizing an active screen made of solid carbon for plasma-assisted thermochemical diffusion treatments opens up new possibilities for control over the in situ generated treatment environment to guarantee reproducible ... ver más
Revista: Coatings