Redirigiendo al acceso original de articulo en 19 segundos...
Inicio  /  Applied Sciences  /  Vol: 12 Par: 8 (2022)  /  Artículo
ARTÍCULO
TITULO

Pose Measurement and Motion Estimation of Space On-Orbit CubeSats Based on Micro-Doppler Effect Using Laser Coherent Radar

Yong Zhang    
Yi Han    
Ruonan Yu    
Zhen Yang    
Zhengjia Wang and Jianlong Zhang    

Resumen

The pose measurement and motion estimation of long-distance space CubeSats is a difficult problem for autonomous rendezvous and track maintenance. In this work, an approach is proposed for the pose estimation of CubeSat based on the micro-Doppler effect by a laser radar system. Parameters such as spin rate and attitude angle can be estimated using data extracted from the returned signal. By utilizing threshold processing, edge extraction of time-frequency (TF) images can be achieved effectively. When the target size is unknown, the double edge ratio method (DERM) is suggested to obtain the attitude angle. The simulation results show that when the noise is not too high, the spin rate and the attitude angle can be acquired precisely. Our experiment indicates that the error for the estimation of spin and pose by our approach fulfills the demand in practice.

 Artículos similares

       
 
Yingxiao Li, Ping Ma and Ju Huo    
In the final approach stage of rendezvous and docking of a spacecraft, the pose parameters of the target spacecraft need to meet docking or berthing capture conditions. Visible light visual measurement systems are increasingly employed in spacecraft grou... ver más
Revista: Aerospace

 
Yaxin Mao, Lamei Yan, Hongyu Guo, Yujie Hong, Xiaocheng Huang and Youwei Yuan    
Inertial measurement unit (IMU) technology has gained popularity in human activity recognition (HAR) due to its ability to identify human activity by measuring acceleration, angular velocity, and magnetic flux in key body areas like the wrist and knee. I... ver más
Revista: Applied Sciences

 
Shia-Chung Chen, Bi-Lin Tsai, Cheng-Chang Hsieh, Nien-Tien Cheng, En-Nien Shen and Ching-Te Feng    
During an injection molding process, different parts of the molded material are subjected to various thermal?mechanical stresses, such as variable pressures, temperatures, and shear stresses. These variations form different pressure?temperature paths on ... ver más
Revista: Applied Sciences

 
Marek Franaszek and Jeremy A. Marvel    
To ensure smooth robot operations, parameters of its kinematic model and a registration transformation between robot base and world coordinate frame must be determined. Both tasks require data acquired by external sensors that can measure either 3D locat... ver más
Revista: Applied Sciences

 
Yunhui Li, Yunhang Yan, Xianchao Xiu and Zhonghua Miao    
Aiming at the relative pose estimation of non-cooperative targets in space traffic management tasks, a two-step pose estimation method, based on spatially intersecting straight lines, is proposed, which mainly includes three aspects: (1) Use binocular vi... ver más
Revista: Aerospace