Redirigiendo al acceso original de articulo en 23 segundos...
Inicio  /  Infrastructures  /  Vol: 3 Par: 3 (2018)  /  Artículo
ARTÍCULO
TITULO

Structural Behavior of the General Archive of the Nation (AGN) Building, Mexico

Marcos M. Chávez    
Fernando Peña    
Claudia Cruz and Gustavo Monroy    

Resumen

This article presents a study on the structural behavior of the Government Building that is part of the old Lecumberri Palace and which currently houses the Mexican General Archive of the Nation. This building was inaugurated in 1900 and closed in 1976, after serving as a prison for 76 years. It was reopened in 1982 after it had undergone several remodeling works. The construction is made of brick masonry with lime mortar. It is supported by a deposit of overly compressible high-plasticity clays. The main problems of this building are the appearance of cracks in both interior and exterior walls, and moisture in the ground floor, caused by differential settlements. The study entailed a geometric and a damage survey as well as ambient vibration tests in order to determine the dynamic properties of the construction. The data obtained was used for the making of a model that, using the finite element method, was analyzed under different load conditions. This study has focused on the overall response with the assumption of smeared crack damage. According to the results, the building?s safety was deemed as acceptable. It has the capability to withstand seismic actions as established by the Mexican Building Code due to the high density of its walls and the resulting stiffness, which infer that the fundamental vibration period of the building would be distant from the predominant vibration period of the soil. This highlights the idea that the building?s critical condition is constituted by the differential settlements, which cause damage in the construction.

 Artículos similares

       
 
Chen Chen, Hong Zhou, Zhengda Lv and Ziqiu Li    
Plated grillage with combined openings was susceptible to complex failure behaviors as the main load-bearing structure of the superstructure on passenger ships subjected to deck loads. Additionally, the deformation and stresses generated during the weldi... ver más

 
Meen-Wah Gui and Ravendra P. Rajak    
Soil nailing is a prevalent and cost-effective technique employed to reinforce and enhance the stability of precarious natural or cut slopes; however, its application as a primary support system to prevent collapses or cave-ins during foundation excavati... ver más
Revista: Buildings

 
Kunda Chamatete and Çaglar Yalçinkaya    
Three-dimensional concrete printing (3DCP) is of great interest to scientists and the construction industry to bring automation to structural engineering applications. However, studies on the thermal performance of three-dimensional printed concrete (3DP... ver más
Revista: Buildings

 
Xun Zhang, Qiankun Liu, Weiwei Xiao, Fan Yu, Liming Cai and Lianzhi Song    
In this investigation, a U-shaped connection (U-C) was introduced for a prefabricated steel plate shear wall with beam-only connections. This design replaces a portion of shear bolts with tension bolts to enhance bolt efficiency and reduce the overall bo... ver más
Revista: Buildings

 
Mohammad Barooni and Deniz Velioglu Sogut    
The design and optimization of floating offshore wind turbines (FOWTs) pose significant challenges, stemming from the complex interplay among aerodynamics, hydrodynamics, structural dynamics, and control systems. In this context, this study introduces an... ver más