Redirigiendo al acceso original de articulo en 16 segundos...
ARTÍCULO
TITULO

A Numerical Analysis of Dynamic Slosh Dampening Utilising Perforated Partitions in Partially-Filled Rectangular Tanks

Mitchell G. Borg    
Claire DeMarco Muscat-Fenech    
Tahsin Tezdogan    
Tonio Sant    
Simon Mizzi and Yigit Kemal Demirel    

Resumen

Conventional liquefied natural gas (LNG) cargo vessels are imposed with tank-fill limitations as precautions to prevent structural damage and stability-loss due to high-impact sloshing, enforcing cargo volume-fills to be lower than 10% or higher than 70% of the tank height. The restrictions, however, limit commercial operations, specifically when handling spot trades and offshore loading/unloading at multiple ports along a shipping route. The study puts forward a computational fluid dynamic (CFD) sloshing analysis of partially-filled chamfered rectangular tanks undergoing sinusoidal oscillatory kinetics with the use of the explicit volume-of-fluid and non-iterative time-advancement schemes. Establishing a 20% to 60% fill-range, the sloshing dynamics were acknowledged within an open-bore, partitioned, and perforated-partitioned tank when oscillating at frequencies of 0.5 Hz and 1 Hz. The overall torque and static pressure induced on the tank walls were investigated. High-impact slamming at the tank roof occurred at 40% and 60% fills, however, the implementation of the partition and perforated-partition barriers successfully reduced the impact due to suppression and dissipation of the wave dynamics.

Palabras claves

 Artículos similares

       
 
Jiaqi Hu, Yin Gu, Jinhuang Yan, Ying Sun and Xinyi Huang    
With the convenient and fast requirements for construction in bridge engineering, prefabricated assembly technology is widely applied in engineering construction. Typically, prefabricated bridge decks are connected through cast-in-place wet joints. Wet j... ver más
Revista: Applied Sciences

 
Omer Faruk Can, Nevin Celik, Filiz Ozgen, Celal Kistak and Ali Taskiran    
In this study, a numerical and experimental analysis of a solar collector with roughness elements in the form of stainless-steel scourers on the absorber surface is presented. According to the location type and number of the stainless steel scourers, the... ver más
Revista: Applied Sciences

 
Iurii Vakaliuk, Silke Scheerer and Manfred Curbach    
In the case of solid slabs made from reinforced concrete that are usually subjected to bending, large areas of the structure are stressed well below their load-bearing capacity or remain stress-free. Contrary to this are shell structures, which can bridg... ver más
Revista: Applied Sciences

 
Young-Cheol Kim, Dong-Hyeop Kim and Sang-Woo Kim    
To achieve the commercialization of electric vertical takeoff and landing (eVTOL) aircrafts, which have recently garnered attention as the next-generation means of transportation, objective certification based on rigorous procedures is essential. With th... ver más
Revista: Aerospace

 
Mengxiang Li, Guo Wang, Kun Liu, Yue Lu and Jiaxia Wang    
The safety assessment of ship cargo securing systems is of significant importance in preventing casualties, vessel instability, and economic losses resulting from the failure of securing systems during transportation in adverse sea conditions. In this st... ver más