Redirigiendo al acceso original de articulo en 22 segundos...
Inicio  /  Water  /  Vol: 16 Par: 7 (2024)  /  Artículo
ARTÍCULO
TITULO

Investigation of Used Water Sediments from Ceramic Tile Fabrication

Simona Elena Avram    
Bianca Violeta Birle    
Lucian Barbu Tudoran    
Gheorghe Borodi and Ioan Petean    

Resumen

Used water treatment is one of the most important aspects of environmental protection regarding industrial processes. Particulate matter dispersions affect water parameters; for example, increased pH values such as 10.21 are found for used floor tile water, and values of 10.84 are found for used wall tile water. However, pH decreases to about 9.42 after the sediment filtration process. This influences water turbidity, which is higher for used wall tile water due to its finer suspensions, and it is considerably decreased after the filtration process. Thus, the main aim of the present research is to investigate particulate matter dispersion into the water flows that are involved in ceramic tile technological processes before and after treatment at used water treatment facilities. X-ray diffraction (XRD) coupled with mineralogical optical microscopy (MOM) reveals that waters from wall tiles and floor tiles have similar mineral dispersions, containing mineral particles of quartz (5?50 µm), kaolinite (1?30 µm), and mullite (5?125 µm). Glass particles (having a dark appearance at MOM investigation) were also found in both samples in a size range of 20?55 µm. High-resolution SEM imaging coupled with the EDS elemental analysis confirms the XRD and MOM observations. Water samples collected after treatment at the treatment facility reveal a significant reduction in the particulate matter MOM, evidencing only small traces of quartz, kaolinite, and mullite in a size range of 1?15 µm, with most of the particles being attached to the filters, as confirmed by XRD. Atomic force microscopy (AFM) effectuated on this sample reveals the presence of kaolinite nanoparticles with a tabular?lamellar aspect and sizes ranging from 40 to 90 nm. The obtained results prove the efficacy of the filtering system regarding targeted particulate matters, ensuring water recirculation into the technological processes. The sludge resulting from the filtration process presents with a dense grainy structure of sediment particles containing quartz, mullite, and kaolinite, along with traces of iron hydroxide crystallized as goethite. Therefore, it cannot be reused in the technological flux, as the iron causes glaze staining; but the observed microstructure, along with the mineralogical composition, indicates that it could be used for other applications, such as ecological bricks or plasters, which will be further investigated.

 Artículos similares

       
 
Karsten Franke, Jann Schöngart and Alexander Mansel    
Four-dimensional visualization, i.e., three-dimensional space plus time, of fluid flow and its interactions in geological materials using positron emission tomography (PET) requires suitable radiotracers that exhibit the desired physicochemical interacti... ver más
Revista: Instruments

 
Filippo Dolente, Rosario Giuseppe Garroppo and Michele Pagano    
The paper presents an experimental security assessment within two widely used open-source 5G projects, namely Open5GS and OAI (Open-Air Interface). The examination concentrates on two network functions (NFs) that are externally exposed within the core ne... ver más
Revista: Future Internet

 
Sonja Kostic, Vladimir Kocovic, Suzana Petrovic Savic, Dragomir Miljanic, Jasmina Miljojkovic, Milan Djordjevic and Djordje Vukelic    
Polypropylene is a widely used linear hydrocarbon polymer with diverse applications due to its exceptional physicochemical characteristics and minimal changes during the recycling process. Numerous studies have focused on factors influencing the mechanic... ver más
Revista: Applied Sciences

 
Piotr Bortnowski, Robert Król, Natalia Suchorab-Matuszewska, Maksymilian Ozdoba and Mateusz Szczerbakowicz    
This study examines the optimization of ore receiving bins in underground copper mines, targeting the reduction of rapid wear and tear on bin components. The investigation identifies the primary wear contributors as the force exerted by the accumulated o... ver más
Revista: Applied Sciences

 
Vera Afreixo, Ana Helena Tavares, Vera Enes, Miguel Pinheiro, Leonor Rodrigues and Gabriela Moura    
In this work, we aimed to establish a stable and accurate procedure with which to perform feature selection in datasets with a much higher number of predictors than individuals, as in genome-wide association studies. Due to the instability of feature sel... ver más
Revista: Applied Sciences