Resumen
In this work, 3D nickel-manganese (NiMn) bimetallic coatings have been studied as electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline (1.0 M KOH) media and the HER in acidic (0.5 M H2SO4) media. The catalysts have been deposited on a titanium substrate (1 × 1 cm2) using low-cost and facile electrochemical deposition method through a dynamic hydrogen bubble template technique. The electrocatalytic performance of these fabricated catalysts was investigated by using Linear Sweep Voltammetry (LSV) for HER and OER at different temperatures ranging from 25 up to 75 °C and also was characterized by scanning electron microscopy (SEM) and inductively coupled plasma optical emission spectroscopy (ICP-OES). It was found that fabricated NiMn/Ti-5 electrocatalyst with Ni2+/Mn2+ molar ratio of 1:5 exhibits excellent HER activity in alkaline media with overpotential of 127.1 mV to reach current density of 10 mA cm-2. On the contrary, NiMn/Ti-1 electrocatalyst that fabricated with Ni2+/Mn2+ molar proportion of 1:1 and lowest Mn-loading of 13.43 µgcm-2 demonstrates exceptional OER activity with minimum overpotential of 356.3 mV to reach current density of 10 mA cm-2. The current densities increase ca. 1.8?2.2 times with an increase in temperature from 25 °C to 75 °C for both HER and OER investigation. Both catalysts also have exhibited excellent long-term stability for 10 h at constant potentials as well as constant current density of 10 mA cm-2 that assure their robustness and higher durability regarding alkaline water splitting.