Redirigiendo al acceso original de articulo en 19 segundos...
Inicio  /  Buildings  /  Vol: 5 Par: 2 (2015)  /  Artículo
ARTÍCULO
TITULO

The Design and Simulation of Natural Personalised Ventilation (NPV) System for Multi-Bed Hospital Wards

Zulfikar A. Adamu and Andrew Price    

Resumen

Adequate ventilation is necessary for thermal comfort and reducing risks from infectious bio-aerosols in hospital wards, but achieving this with mechanical ventilation has carbon and energy implications. Natural ventilation is often limited to window-based designs whose dilution/mixing effectiveness are subject to constraints of wind speed, cross ventilation, and in the case of hospital wards, proximity of patients to external walls. A buoyancy-driven natural ventilation system capable of achieving dilution/mixing was shown to be feasible in a preceding study of novel system called natural personalised ventilation (NPV). This system combined both architecture and airflow engineering principles of space design and buoyancy and was tested and validated (salt-bath experiment) for a single bed ward. This research extends the previous work and is proof-of-concept on the feasibility of NPV system for multi-bed wards. Two different four-bed ward types were investigated of using computational fluid dynamics (CFD) simulations under wind-neutral conditions. Results predict that NPV system could deliver fresh air to multiple patients, including those located 10 m away from external wall, with absolute flow rates of between 32 L·s-1 and 54 L·s-1 for each patient/bed. Compared to same wards simulated using window design, ingress of airborne contaminants into patients? breathing zone and summer overheating potential were minimised, while overall ward dilution was maximised. Findings suggest the NPV has potentials for enabling architects and building service engineers to decouple airflow delivery from the visualisation and illumination responsibilities placed upon windows.

 Artículos similares

       
 
Liliana Andrei and Oana Luca    
Integrating autonomous vehicles (AVs) into urban areas poses challenges for transportation, infrastructure, building, environment, society, and policy. This paper goes beyond the technical intricacies of AVs and takes a holistic, interdisciplinary approa... ver más

 
Khaqan Baluch, Heon-Joon Park, Kyuchan Ji and Sher Q. Baluch    
Whilst numerical modelling is commonly used for simulation to check the design of water conveyance, sluicing and spillway structure design, the numerical modelling has rarely been compared with the physical model tests. The objective of this research pre... ver más
Revista: Water

 
Martin Hauer, Sascha Hammes, Philipp Zech, David Geisler-Moroder, Daniel Plörer, Josef Miller, Vincent van Karsbergen and Rainer Pfluger    
In the architecture, engineering, and construction industries, the integration of Building Information Modeling (BIM) has become instrumental in shaping the design and commissioning of smart buildings. At the center of this development is the pursuit of ... ver más
Revista: Buildings

 
Sanjay Nambiar, Anan Ashrabi Ananno, Herman Titus, Anton Wiberg and Mehdi Tarkian    
In the quest to enhance the efficiency of gas turbines, there is a growing demand for innovative solutions to optimize high-pressure turbine blade cooling. However, the traditional methods for achieving this optimization are known for their complexity an... ver más

 
Meili Wang, Ye Tian, Shengfa Yang and Pingyi Wang    
This study combined the characteristics of rock mass structure, channel characteristics of main and tributary rivers, and flow conditions in the Three Gorges Reservoir area of the Yangtze River and designed and constructed a three-dimensional granular ro... ver más
Revista: Water