The deformation characteristics of buried HDPE transfer lines in trenches under the effect of temperature

Authors

  • Necmettin Polat Department of Civil Engineering, Aksaray University, Aksaray (Turkey)
  • Can Erenson Department of Civil Engineering, Aksaray University, Aksaray (Turkey)
  • Niyazi Uğur Terzi Department of Civil Engineering, Aksaray University, Aksaray (Turkey)

DOI:

https://doi.org/10.7764/RDLC.20.3.452

Keywords:

buried pipe, deformation behaviour, high-density polyethylene, silica sand, thermal conditions

Abstract

Today, the use of high-density polyethylene (HDPE) transfer lines is increasing day by day for drinking water, wastewater, sewerage networks, rainwater drainage lines, water transport structures, and natural energy sources, etc. In this study, flexible HDPE pipes were embedded in a trench to expose them to variable relative density and different thermal conditions so that the resulting deformation behavior could be investigated. Displacements and elastic strain values in the crown and spring line regions were measured. The main aim of this research was to determine the behavior of HDPE pipes under temperature effects within the framework of geotechnical principles to reflect real field conditions. As a result, pipes subject to vertical loading were tested under different relative density and thermal conditions. In the experiments carried out in a silica sandy trench, the deformations increased due to an increase in relative density. The maximum displacements and bending moment values were obtained at 50°C, which was the maximum thermal condition applied. An increase in temperature increased the deformation values due to the resulting decrease in the modulus of elasticity.

Downloads

Download data is not yet available.

Author Biographies

Necmettin Polat, Department of Civil Engineering, Aksaray University, Aksaray (Turkey)

Can ERENSON graduated with a first from the Civil Engineering Department of Aksaray University in 2013. He is received his M.Sc. and Ph.D. degrees in Civil Engineering in 2015 and 2020, respectively.  He has been working as a Research Assistant Dr. at Civil Engineering Department of Aksaray University. His main research fields are buried pipelines, soil improvement, waste tire management and geotechnical modelling.

Can Erenson, Department of Civil Engineering, Aksaray University, Aksaray (Turkey)

Necmettin POLAT is a senior engineer in Emin Construction Company. He received his B.Sc. and M.Sc. degrees from the Aksaray University in 2017 and 2020, respectively. His research focuses on construction works, site management and installation works.

Niyazi Uğur Terzi, Department of Civil Engineering, Aksaray University, Aksaray (Turkey)

Niyazi Uğur TERZİ is currently a Professor of Civil Engineering at the Aksaray University. He received his B.Sc. and M.Sc. degrees from the Civil Engineering Department of Niğde University in 1999 and 2002, respectively. He completed his Ph.D. education at Yildiz Technical University. Prof. Terzi conducts various researches which are responsible in geotechnical design, thermal insulation, clayey soils, and measurement technics.

References

Al-Mosawe, M. J., Said, A. I., & Dawood, A. O. (2020). Effect of bedding compaction on the behavior of buried plain concrete pipes. Key Engineering Materials, 857, 89–98. https://doi.org/10.4028/www.scientific.net/KEM.857.89

Alawaji, H. A. (2004). Performance of buried HDPE pipes at elevated temperatures. Electronic Journal of Geotechnical Engineering, 1(19).

ASTM D2321-00. (2000). ASTM D2321-00, Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications. https://doi.org/10.1520/D2321-00

ASTM D2487_06. (2006). ASTM D2487 - 06, Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System). https://doi.org/10.1520/D2487-06

Callister, W. D., & Rethwisch, D. G. (2015). Fundamentals of Materials Science and Engineering, An Integrated Approach (5th ed.). Wiley.

Cheng, J. J. (2008). Mechanical and chemical properties of high density polyethylene: effects of microstructure on creep characteristics [PhD Thesis, Univer-sity of Waterloo, Ontario, Canada]. http://hdl.handle.net/10012/4121

Gabriel, L. H., & Moran, E. T. (1998). Service life of drainage pipe. National Academy Press.

Howard, A., & Rahman, S. (2020). Review of design methods in AWWA manuals for various flexible pipe. Pipelines 2020, 336–345. https://doi.org/10.1061/9780784483213.037

Kapischke, M., & Pries, A. (2014). Theodor Billroth’s vision and Karl Ziegler’s action: Commemoration of the 40th day of death and the 50th anniversary of conferment of Nobel Prize for Chemistry of Karl Ziegler. Surgery (United States), 155(2), 347–349. https://doi.org/10.1016/j.surg.2013.10.022

Khademi-Zahedi, R., & Alimouri, P. (2018). Finite element analysis to the effect of thermo-mechanical loads on stress distribution in buried polyethylene gas pipes jointed by electrofusion sockets, repaired by PE patches. Energies, 11(10). https://doi.org/10.3390/en11102818

Krishnaswamy, R. K. (2005). Analysis of ductile and brittle failures from creep rupture testing of high-density polyethylene (HDPE) pipes. Polymer, 46(25), 11664–11672. https://doi.org/10.1016/j.polymer.2005.09.084

Laidlaw, T. C. (1999). Influence of local support on corrugated HDPE pipe. MSc Thesis, The University of Western Ontario, Faculty of Graduate Studies.

Lepoutre, P. (2013). The manufacture of polyethylene. X-Polymers-J-Polyethylene, Transpak Industries Ltd.

Li, Z., Zhu, H., Kong, X., & Seibi, A. (2012). Combined effect of temperature and soil load on buried HDPE pipe. Advanced Materials Research, 452–453, 1169–1173. https://doi.org/10.4028/www.scientific.net/AMR.452-453.1169

Liang, J. Z. (2019). Melt strength and drawability of HDPE, LDPE and HDPE/LDPE blends. Polymer Testing, 73, 433–438. https://doi.org/10.1016/j.polymertesting.2018.12.007

Merah, N., Saghir, F., Khan, Z., & Bazoune, A. (2006). Effect of temperature on tensile properties of HDPE pipe material. Plastics, Rubber and Compo-sites, 35(5), 226–230. https://doi.org/10.1179/174328906X103178

Patel, B. D., & Srinivas, A. R. (2012). Validation of experimental strain measurement technique and development of force transducer. International Journal of Scientific & Engineering Research, 3(10). http://www.ijser.org

Polat, N. (2020). Investigation of deformation properties of high-density polyethylene pipes under thermal effects. MSc Thesis, Graduate School of Natural and Applied Sciences, Aksaray University, Aksaray, Turkey.

Sadr-Al-Sadati, S. A., & Jalili Ghazizadeh, M. (2019). The experimental and numerical study of water leakage from high-density polyethylene pipes at elevated temperatures. Polymer Testing, 74, 274–280. https://doi.org/10.1016/j.polymertesting.2019.01.014

Seymour, R. (1989). Pioneers in Polymer Science. In F. B. Seymour (Ed.), Chemists and Chemistry (1st ed.). Springer Netherlands. https://doi.org/10.1007/978-94-009-2407-9

Shaidullin, N. M., Salakhov, I. I., Borisenko, V. N., Tavtorkin, A. N., & Nifant’ev, I. E. (2020). Structural, rheological, and mechanical properties of binary compounds based on high-density polyethylene and linear low-density polyethylene. Russian Journal of Applied Chemistry, 93(8), 1179–1187. https://doi.org/10.1134/S1070427220080108

Tarani, E., Terzopoulou, Z., Bikiaris, D. N., Kyratsi, T., Chrissafis, K., & Vourlias, G. (2017). Thermal conductivity and degradation behavior of HDPE/graphene nanocomposites: pyrolysis, kinetics and mechanism. Journal of Thermal Analysis and Calorimetry, 129(3), 1715–1726. https://doi.org/10.1007/s10973-017-6342-0

Tavman, I., Aydoğdu, Y., Kök, M., Turgut, A., & Ezan, A. (2011). Measurement of heat capacity and thermal conductivity of HDPE/expanded graphite nanocomposites by differential scanning calorimetry. Archives of Materials Science, 50(1), 56–60. www.archivesmse.org

Terzi, N. U. (2007). Gömülü borulara etkiyen düşey ve yatay yüklerin boru stabilitesine olan etkilerinin araştırılması. PhD Thesis, Yildiz Technical Universi-ty, Graduate School of Natural and Applied Sciences, Istanbul, Turkey.

Trautmann, C. H., & O’Rourke, T. D. (1985). Lateral force-displacement response of buried pipe. Journal of Geotechnical Engineering, 111(9), 1077–1092. https://doi.org/10.1061/(ASCE)0733-9410(1985)111:9(1077)

Ural, N., & Gergin, A. (2020). Foundation design on problematic soils with high underground water level. Revista de La Construccion, 19(3), 233–245. https://doi.org/10.7764/RDLC.19.3.233

Downloads

Published

2021-12-31

How to Cite

Polat, N. ., Erenson, C., & Terzi, N. U. (2021). The deformation characteristics of buried HDPE transfer lines in trenches under the effect of temperature. Revista De La Construcción. Journal of Construction, 20(3), 452–462. https://doi.org/10.7764/RDLC.20.3.452