Resumen
A dynamic disturbance will induce cracks around the tunnel in tunnel blasting or shield construction. To investigate the overall stability of cracks with various angles during a fixed borehole (round hole explosion) blasting, models containing an individual crack with different angles were introduced for simulation research. The research set up a thin sheet model with a length of 350 mm and a width of 150 mm, with a 7 mm diameter hole and a pre-existing crack of 75 mm and 5 mm in the middle. The evolution of the stress wave propagation model and the crack propagation model were simulated using the AUTODYN software. And in this study, the theory of stress wave is used to creatively explain the dynamic load under the action of formation and reasons for the danger zone. The results indicate that pre-existing cracks from different angles will have an impact on the blast hole and the new cracks generated around itself. At 45?90°, pre-existing cracks will direct reflected stress waves to promote some cracks around the hole to have faster growth rates than others, and these special cracks with faster growths and longer lengths will more easily connect with the free surface or other cracks, resulting in overall instability. And these conditions are consistent with the prediction made by the stress wave propagation simulation study. The research results have certain guiding significance for the stability analysis and hazardous area prediction of tunnel blasting with existing cracks.