Redirigiendo al acceso original de articulo en 18 segundos...
Inicio  /  Applied Sciences  /  Vol: 9 Par: 12 (2019)  /  Artículo
ARTÍCULO
TITULO

The Effect of Grain Size on the Hydrodynamics of Mudflow Surge from a Tailings Dam-Break

Xiaofei Jing    
Yulong Chen    
Dan Xie    
David J. Williams    
Shangwei Wu    
Wensong Wang and Tianwei Yin    

Resumen

Due to the differences in mineral processing techniques, the grain-size of tailings used in the construction of a tailings pond is not commensurate. It has been determined that the hydrodynamic characteristics of mudflow resulting from the failure of tailings dams are directly influenced by grain-size, solids concentration, and the surface roughness of gully and impoundment geometry. However, the behavior and influence of the grain size of mudflow resulting from a tailings dam failure have not been sufficiently examined. To investigate the effect of grain size on the hydrodynamic characteristics of mudflow surging from tailings dam failure, the law of mudflow evolution, the change of dynamics pressure, and the velocity distributions of mudflow have been obtained via a series of flume experiments utilizing three types of grain size tailings (d50 = 0.72 mm; d50 = 0.26 mm; d50 = 0.08 mm, respectively). This study proves conclusively that with an increase in grain size, the peak value of mudflow depth notably decreases in the same section. Furthermore, it has been noted that both the velocity and the dynamic pressure raise significantly, wherein the velocity displays two distinct primary stages; namely a rapid reduction stage and a slow reduction stage. This research provides a framework for the exploration of the effect of grain size on the hydrodynamics of slurry surging from a tailings dam failure, and all presented results provide an indispensable tool in terms of the accurate assessment of potential damage in the case of a prospective impoundment failure.

 Artículos similares

       
 
Shun Liu, Hongyi Lu, Bin Zhang, Yucheng Yang and Doudou Sang    
The presence of the erosive burning effect during the operation of a solid rocket motor (SRM) is one of the most important factors affecting the proper operation of the motor. To solve the effects of the operating process of the motor under erosive burni... ver más
Revista: Aerospace

 
Yang Liu, Xintong Li, Pengcheng Wang, Xiaotian Zhang, Hao Zhu and Guobiao Cai    
This paper proposed a multi-objective, multi-disciplinary design optimization and multi-attribute evaluation method for the manned lunar lander descent stage. A system design model is established considering multiple disciplines such as propulsion, struc... ver más
Revista: Aerospace

 
Fatma Barood, Mohd Mustafa Awang Kechik, Tan Sin Tee, Chen Soo Kien, Lim Kean Pah, Kai Jeat Hong, Abdul Halim Shaari, Hussein Baqiah, Muhammad Khalis Abdul Karim, Muhammad Kashfi Shabdin, Khairul Khaizi Mohd Shariff, Azhan Hashim, Nurbaisyatul Ermiza Suhaimi and Muralidhar Miryala    
This article reports the effect of a nanoscale addition of TiO2 on the structure and superconducting parameters of the high-temperature superconductor YBa2Cu3O7-d (Y123). Polycrystalline compounds of Y123 with different percentages of TiO2, x = 0.0, 0.2,... ver más
Revista: Coatings

 
Ksenia E. Smetanina, Pavel V. Andreev, Evgeny A. Lantsev, Aleksey V. Nokhrin, Artem A. Murashov, Natalia V. Isaeva, Yury V. Blagoveshchensky, Maksim S. Boldin and Vladimir N. Chuvil?deev    
The research results conducted on binderless tungsten carbide (WC) ceramics obtained by spark plasma sintering (SPS) of WC powders with different average particle sizes (95, 800, 3000 nm) are presented. Nonuniform distribution of crystalline phases and m... ver más
Revista: Coatings

 
Alexey Prosviryakov and Andrey Bazlov    
In this work, we studied the effect of thermal exposure on the microstructure and mechanical properties of an Al-5 wt.% TiO2 composite material with additions of 5 wt.% Cu and 2 wt.% stearic acid as a process control agent (PCA), obtained by mechanical a... ver más
Revista: Applied Sciences