Redirigiendo al acceso original de articulo en 15 segundos...
Inicio  /  Nauka ta Progres Transportu  /  Núm: 2 Par: 0 (2003)  /  Artículo
ARTÍCULO
TITULO

STABILITY OF CONTINUOUS WELDED RAIL UNDER A MOVING TRAIN

V. I. Novakovych    

Resumen

In article the new principle of calculation of a railway track without joints at stability is stated in view of the factor of time and influence of trains.

 Artículos similares

       
 
Miguel Aybar-Mejía, Randy Andrés, Alam Cabral-Soto, Carlos Montás, Wilmer-Johann Núñez-García, Elvin Arnaldo Jiménez Matos, Giuseppe Sbriz-Zeitun and Deyslen Mariano-Hernández    
The growing integration of tourist areas and complexes increases the demand for electrical power systems. This increased demand may represent a vulnerability to voltage and frequency stability in electrical grids, where these parameters are essential for... ver más
Revista: Urban Science

 
Ya-Sin Yang, Hsin-Fu Yeh, Chia-Chi Huang and Hsin-Yu Chen    
Owing to active orogenic movement and the monsoon climate, rainfall-induced landslide disasters often occur in Taiwan. Hence, hillslope hydrology and stability have received considerable research attention. However, it remains difficult to accurately est... ver más
Revista: Water

 
Fahad Alshehri and Mark Ross    
Depth?discharge rating is required at gauged and ungauged locations for hydrologic modeling of alluvial systems to evaluate streamflow and manage regional water resources. Spanning low to high-flow conditions, manual field measurements are used to develo... ver más
Revista: Water

 
Moses T. Yilleng, Nancy Artioli, David Rooney and Haresh Manyar    
Palladium@mesoporous titania core@shell nanoparticles with uniform and narrow particle size distribution were synthesised using a four component ??water in oil?? microemulsion system. The prepared materials were well characterised using N2 adsorption?des... ver más
Revista: Water

 
Joseph Moubogha Moubogha, Gabriel Margalida, Pierric Joseph, Olivier Roussette and Antoine Dazin    
Stall and surge are strong limitations in the operating range of compressors and thus one of the major limits of jet engine performance. A promising way to push the stability limit of compression machines is to inject a small amount of flow at the blade ... ver más