Redirigiendo al acceso original de articulo en 16 segundos...
ARTÍCULO
TITULO

Improving the operation of a drum grain dryer with justification of the low-temperature mode parameters

Vadim Paziuk    
Volodymyr Dub    
Oleg Tereshkin    
Andreii Zahorulko    
Igor Lebedynets    
Dima Pankov    
Anna Hotvianska    

Resumen

The proposed engineering and technological solutions are aimed at improving the operation of a low-temperature drum grain dryer by using a combined mechanical vibration exciter, with the further justification of low-temperature regime parameters. Existing vibration technologies imply the high-temperature drying of food grains with further utilization of spent heat carrier for reheating it. In this case, the high-temperature drying of cereals and seed crops (grains, onions, etc.) does not make it possible to maintain high germination, emphasizing the need for low-temperature treatment, which, in this case, reduces the efficiency of spent heat carrier. Therefore, to improve the efficiency of the drying process and technology, it has been proposed to employ vibration low-frequency technologies that ensure seed quality.The trajectory and the kinetic energy of the drum container with a combined mechanical vibration exciter have been calculated for the improved vibratory drum grain dryer. The rational vibration intensity for seed drying providing the following kinetic characteristics has been established: vibration speed, to 0.03 m/s; vibration acceleration, 30 m/s2; vibration intensity, 2.6 m2/s2; at amplitude vibration not exceeding 2 mm. It has been also established that the intense warming of a barley layer occurs at a temperature of 50 °C and a humidity of 13.5 %, the final temperature is 42.4 °C, and, at 40 °C, is, accordingly, 35.4 °C. This has confirmed that the low-temperature drying of barley seeds of the variety "Stalker" (Ukraine) takes place during the periods of constant and falling drying speed characterized by a high level of germination (95...93 %)

 Artículos similares

       
 
Josyp Luchko,Vitalii Kovalchuk,Ivan Kravets,Oleksiy Gajda,Arthur Onyshchenko     Pág. 6 - 13
The technical condition of the railroad track subgrade has been analyzed, as well as the issues related to ensuring its strength and stability when exposed to floodwaters and when the track's sections are overmoistened during operation. As a result, it h... ver más

 
Oleksij Fomin,Alyona Lovska,Ievgen Medvediev,Halyna Shatkovska     Pág. 30 - 37
To reduce the dynamic loading and prolong the service life of a semi-wagon's girder beam by improving its fatigue strength, it has been proposed to improve its design. A special feature of the girder beam is that its middle part (the distance between the... ver más

 
Olena Slavinska,?natolii Tsynka,Iryna Bashkevych     Pág. 75 - 87
To develop the methods for predicting deformations on floodplain areas in the zone of influence of bridge crossings, a mathematical model of a suspended flow with grass vegetation was developed. The problem of calculating the hydrodynamic fields of veloc... ver más

 
Svyatoslav Kravets,Vladimir Suponyev,Aleksej Goponov,Serhii Kovalevskyi,Andrii Koval     Pág. 23 - 28
The presented results of scientific research are aimed at increasing the efficiency of trenching for laying the utility lines using new less energy-consuming technologies of excavating the soil with the working equipment of multi-scraper excavators.The p... ver más

 
Anatolij Perederko     Pág. 22 - 27
Research on a contact induction displacement sensor over short distances is presented. A ferrite core with a winding and a movable armature is used as a sensor. There is an air gap between the core and the armature.To solve the problem of improving the a... ver más