Redirigiendo al acceso original de articulo en 15 segundos...
ARTÍCULO
TITULO

Identifying the features of structural and phase transformations in processing the waste of metallurgical products doped with refractory elements

Vadym Volokh    
Endar Kim    
Tetiana Fesenko    
Artem Petryshchev    
Sergey Artemev    
Bohdan Tsymbal    
Lesia Makarenko    
Andrii Hedzyk    
Volodymyr Slabko    
Vasyl Khmelovskyi    

Resumen

Phase composition and microstructure of the doping alloy obtained by regenerative smelting of technogenic wastes were studied. This is necessary to determine technological characteristics that increase the degree of extraction of doping elements during the processing of technogenic raw materials and subsequent use of the alloying material. It was determined that at a Si:C atomic ratio in the charge at a level of 0.05?0.19 (O:C atomic ratio is 1.25), a solid solution of carbon and doping elements in ?-Fe, Fe3Si, and Fe5Si3 was found in the alloy. At Si:C atomic ratio at a level of 0.05 in the alloy, a solid solution of carbon and alloying elements in ?-Fe was dominating with a weak manifestation of Fe3Si. When the value of Si:C atomic ratio was increased to 0.09, Fe5Si3 was found together with Fe3Si. A gradual increase in Si:C atomic ratio to 0.09, 0.12, and 0.19 led to a higher manifestation of Fe3Si and Fe5Si3. The microstructure of the alloy in the entire studied range of Si:C ratio values in the charge was characterized by the presence of several phases with different contents of doping elements. The content of elements in the studied areas (at. %) was 1.65?52.10 for Ni, 2.80?53.92 for Cr, 0.19?13.48 for Mo, 0.40?12.21 for W, 13.85?33.85 for Nb, 2.40?6.63 for Ti. An increase in Si:C atomic ratio in the charge from 0.05 to 0.19 caused an increase in silicon concentration in the studied areas of the microstructure (from 0.28 at. %) to 6.31 at. %. According to an analysis of the sample areas, carbon content was characterized by figures from 2.07 at. % to 14.23 at. %). Some of the investigated particles with a high content of W, Mo, Nb corresponded to complex carbide compounds with a high probability. Based on the study results, it can be pointed out that the most favorable Si C atomic ratio in the charge is 0.12 (with an O:C atomic ratio of 1.25). The resulting product had a relatively low content of silicon and carbon but was sufficient enough to provide the required reducing and deoxidizing strength of the alloy

 Artículos similares

       
 
Hamad Almaghrabi, Ben Soh and Alice Li    
Effective and efficient use of information and communication technology (ICT) systems in the administration of educational organisations is crucial to optimise their performance. Earlier research on the identification and analysis of ICT users? satisfact... ver más
Revista: Information

 
Yifan Wang, Jinglei Xu, Qihao Qin, Ruiqing Guan and Le Cai    
In this study, we propose a novel dynamic mode decomposition (DMD) energy sorting criterion that works in conjunction with the conventional DMD amplitude-frequency sorting criterion on the high-dimensional schlieren dataset of the unsteady flow of a spik... ver más
Revista: Aerospace

 
Woonghee Lee and Younghoon Kim    
This study introduces a deep-learning-based framework for detecting adversarial attacks in CT image segmentation within medical imaging. The proposed methodology includes analyzing features from various layers, particularly focusing on the first layer, a... ver más
Revista: Applied Sciences

 
Wenbo Peng and Jinjie Huang    
Current object detection methods typically focus on addressing the distribution discrepancies between source and target domains. However, solely concentrating on this aspect may lead to overlooking the inherent limitations of the samples themselves. This... ver más
Revista: Applied Sciences

 
Daniel Rusche, Nils Englert, Marlen Runz, Svetlana Hetjens, Cord Langner, Timo Gaiser and Cleo-Aron Weis    
Background: In this study focusing on colorectal carcinoma (CRC), we address the imperative task of predicting post-surgery treatment needs by identifying crucial tumor features within whole slide images of solid tumors, analogous to locating a needle in... ver más
Revista: Applied Sciences