Redirigiendo al acceso original de articulo en 22 segundos...
ARTÍCULO
TITULO

Improving the technological process of restoring the tillage machine working parts

Anatolii Dudnikov    
Oleksandr Gorbenko    
Anton Kelemesh    
Olga Drozhchana    

Resumen

An analysis of the wear of machine parts has made it possible to establish characteristic requirements for the technological process of restoring worn surfaces. Experimental studies on hardening the working surfaces of plowshares have made it possible to determine processing parameters: oscillation frequency of the processing tool of 1,400 min-1, the oscillation amplitude of 0.5 mm and processing time of 20 s. Studies of the influence of conventional and vibration working on strength characteristics were carried out first on models and then on actual parts. New shares served as models. Experimental studies of these shares provided the identity of the nature of the cutting element wear. The sameness of the model and the actual part deformation degree was provided by the same conditions of the passage of the hardening processes.The trustworthiness of the results of experimental studies was assessed in accordance with the law of theoretical distribution at a given value of confidence probability a=0.95. The studies have established that the share width of 116?117.5 mm which has a certain effect on the share efficiency corresponds to the highest probability of 0.39.It has been experimentally established that the degree of hardening of the shares made of L-53 steel and surfaced with sormite and vibration hardened is 1.85 times greater than in conventional processing. The studies have made it possible to determine the nature of change in the share shape and thickness of the cutting edge and choose a more efficient process of its restoration by vibration hardening. A method of recovering shares by welding strips of 45 steel with automatic hard surfacing and vibration hardening was proposed

 Artículos similares

       
 
Predrag Mitic, Suzana Petrovic Savic, Aleksandar Djordjevic, Milan Eric, Enes Sukic, Dejan Vidojevic and Miladin Stefanovic    
This research focuses on small- and medium-sized businesses that provide machining or other process services but do not produce their own products. Their daily manufacturing schedule varies according to client needs. Small- and medium-sized businesses st... ver más
Revista: Applied Sciences

 
Young-Joon Yoon, Seo-Yeon Kim, Yun-Ku Lee, Namhyuk Ham, Ju-Hyung Kim and Jae-Jun Kim    
This study proposes a decision-making framework that integrates a routing model based on the geographic information system (GIS) and a genetic algorithm into a building-information modeling (BIM) environment to overcoming the limitations of the planning ... ver más
Revista: Applied Sciences

 
Gianluca Diodati, Assunta Sorrentino, Lorenzo Pellone, Antonio Concilio, Monica Ciminello, Gianvito Apuleo, Shay Shoham, Iddo Kressel and David Bardenstein    
In the aeronautical field, the damage that occurs to a carbon-fibre-reinforced polymer (CFRP) structure analysis is a crucial point for further improving its capability and performance. In the current the state of the art, in fact, many issues are linked... ver más
Revista: Aerospace

 
Kranthi Kumar Maniam, Raghuram Chetty, Ravikumar Thimmappa and Shiladitya Paul    
Fuel cells are a key enabling technology for the future economy, thereby providing power to portable, stationary, and transportation applications, which can be considered an important contributor towards reducing the high dependencies on fossil fuels. El... ver más
Revista: Applied Sciences

 
Dimitrios Piromalis and Antreas Kantaros    
A newly introduced term in the field of simulating an artificial or physical system is that of the ?Digital Twin? concept method. It employs a digital representation and modeling method, capable of expanding and improving the life cycle of complex items,... ver más